Z16F6411FI20SG Zilog, Z16F6411FI20SG Datasheet - Page 179

• Manufacturer Part Number: Z16F6411FI20SG
• Description: IC ZNEO MCU FLASH 64K 80QFP
• Manufacturer: Zilog
• Series: Encore!® ZNEOr

Specifications of Z16F6411FI20SG

• Core Processor: ZNEO
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: EBI/EMI, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 60
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 80-BQFP
• Processor Series: Z16F6x
• Core: Zneo
• Data Bus Width: 16 bit
• Data Ram Size: 4 B
• Interface Type: ESPI, I2C, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 60
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: Z16F2800100ZCOG
• Minimum Operating Temperature: 0 C
• On-chip Adc: 10 bit, 12 Channel
• For Use With: 770-1003 - ISP 4PORT FOR ZILOG ZNEO MCU269-4537 - DEV KIT FOR Z16F ZNEO
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4571

®
ZNEO
Z16F Series
Product Specification
163
LMST—LIN Master Mode
0 = LIN Master mode not selected.
1 = LIN Master mode selected (if
= 0)
MPEN, PEN, LSLV
LSLV—LIN Slave Mode
0 = LIN Slave mode not selected.
1 = LIN Slave mode selected (if
= 0)
MPEN, PEN, LMST
ABEN—Autobaud Enable
0 = Autobaud not enabled.
1 = Autobaud enabled if in LIN SLAVE mode.
ABIEN—Autobaud Interrupt Enable
0 = Interrupt following autobaud does not occur.
1 = Interrupt following autobaud enabled if in LIN SLAVE mode. When the autobaud
character is received, a receive interrupt is generated and the
bit is set in the status0
ATB
register.
LinState[1:0]—LIN State Machine
The LinState is controlled by both hardware and software. Software force a state change at
any time if necessary. In normal operation, software moves the state in and out of Sleep
state. For a LIN Slave, software changes the state from Sleep to Wait for Break after which
hardware cycles through the Wait for Break, Autobaud and Active states. Software changes
the state from one of the active states to Sleep state if the LIN bus goes into Sleep mode.
For a LIN Master, software changes state from Sleep to Active where it remains until
software sets it back to the Sleep state. After configuration software does not alter the
field during operation.
LinState
00 = Sleep State (either LMST or LSLV is set)
01 = Wait for Break state (only valid for LSLV = 1)
10 = Autobaud state (only valid for LSLV = 1)
11 = Active state (either LMST or LSLV is set)
TxBreakLength—Used in LIN mode by the master to control the duration of the
transmitted Break. 
00 = 13 bit times
01 = 14 bit times
10 = 15 bit times
11 = 16 bit times
PS022008-0810
P R E L I M I N A R Y
LIN-UART