Z16F6411FI20SG Zilog, Z16F6411FI20SG Datasheet - Page 81

• Manufacturer Part Number: Z16F6411FI20SG
• Description: IC ZNEO MCU FLASH 64K 80QFP
• Manufacturer: Zilog
• Series: Encore!® ZNEOr

Specifications of Z16F6411FI20SG

• Core Processor: ZNEO
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: EBI/EMI, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 60
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 80-BQFP
• Processor Series: Z16F6x
• Core: Zneo
• Data Bus Width: 16 bit
• Data Ram Size: 4 B
• Interface Type: ESPI, I2C, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 60
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: Z16F2800100ZCOG
• Minimum Operating Temperature: 0 C
• On-chip Adc: 10 bit, 12 Channel
• For Use With: 770-1003 - ISP 4PORT FOR ZILOG ZNEO MCU269-4537 - DEV KIT FOR Z16F ZNEO
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4571

Low-Power Modes
STOP Mode
HALT Mode
PS022008-0810
Caution:
The ZNEO
Power management functions are divided into three categories to include CPU operating
modes, peripheral power control, and programmable option bits. The highest level of
power reduction is provided through a combination of all functions.
Execution of the ZNEO CPU’s
In STOP mode, the operating characteristics are:
•
•
•
•
•
•
•
To minimize current in STOP mode, all GPIO pins that are configured as digital inputs
must be driven to one of the supply rails (V
disabled, and WDT must be disabled. The device is brought out of STOP mode using Stop
Mode Recovery. For detailed information on Stop Mode Recovery, see
Mode Recovery
Execution of the ZNEO CPU’s
The following are the operating characteristics in HALT mode:
•
•
•
To prevent excess current consumption when using an external clock source in
IPO is stopped; XIN and XOUT pins are driven to V
System clock is stopped.
ZNEO CPU is stopped.
Program counter (PC) stops incrementing.
If enabled for operation during STOP mode, the WDT and its internal RC oscillator
continue to operate.
If enabled for operation in STOP mode through the associated option bit, the VBO
protection circuit continues to operate.
All other on-chip peripherals are non-active.
STOP Mode, the external clock must be disabled.
System clock is enabled and continues to operate.
ZNEO CPU is stopped.
PC stops incrementing.
®
Z16F Series products contain advanced integrated power-saving features.
on page 58.
P R E L I M I N A R Y
STOP
HALT
instruction places the device into STOP mode. 
instruction places the device into HALT mode.
DD
or V
SS
), the VBO protection must be
SS
.
Product Specification
ZNEO
Low-Power Modes
Reset and Stop
Z16F Series
66