C8051F819-GM Silicon Laboratories Inc, C8051F819-GM Datasheet - Page 15

• Manufacturer Part Number: C8051F819-GM
• Description: IC MCU 8BIT 8KB FLASH 20QFN
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F81xr

Specifications of C8051F819-GM

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Cap Sense, POR, PWM, WDT
• Number Of I /o: 17
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-QFN
• Processor Series: C8051F8x
• Core: 8051
• Data Bus Width: 16 bit
• Data Ram Size: 512 B
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 17
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F800DK
• Minimum Operating Temperature: - 55 C
• Package: 20QFN EP
• Device Core: 8051
• Family Name: C8051F8xx
• Maximum Speed: 25 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: 336-1799-5

1. System Overview
C8051F80x-83x devices are fully integrated, mixed-signal, system-on-a-chip capacitive sensing MCUs.
Highlighted features are listed below. Refer to Table 2.1 for specific product feature selection and part
ordering numbers.
With on-chip power-on reset, V
devices are truly stand-alone, system-on-a-chip solutions. The Flash memory can be reprogrammed even
in-circuit, providing non-volatile data storage, and also allowing field upgrades of the 8051 firmware. User
software has complete control of all peripherals, and may individually shut down any or all peripherals for
power savings.
The C8051F80x-83x processors include Silicon Laboratories’ 2-Wire C2 Debug and Programming inter-
face, which allows non-intrusive (uses no on-chip resources), full speed, in-circuit debugging using the pro-
duction MCU installed in the final application. This debug logic supports inspection of memory, viewing and
modification of special function registers, setting breakpoints, single stepping, and run and halt commands.
All analog and digital peripherals are fully functional while debugging using C2. The two C2 interface pins
can be shared with user functions, allowing in-system debugging without occupying package pins.
Each device is specified for 1.8–3.6 V operation over the industrial temperature range (–45 to +85 °C). An
internal LDO regulator is used to supply the processor core voltage at 1.8 V. The Port I/O and RST pins are
tolerant of input signals up to 5 V. See Table 2.1 for ordering information. Block diagrams of the devices in
the C8051F80x-83x family are shown in Figure 1.1 through Figure 1.9.















High-speed pipelined 8051-compatible microcontroller core (up to 25 MIPS)
In-system, full-speed, non-intrusive debug interface (on-chip)
Capacitive sense interface with 16 input channels
10-bit 500 ksps single-ended ADC with 16-channel analog multiplexer and integrated temperature sensor
Precision calibrated 24.5 MHz internal oscillator
16 kb of on-chip Flash memory
512 bytes of on-chip RAM
SMBus/I
Three general-purpose 16-bit timers
Programmable counter/timer array (PCA) with three capture/compare modules
On-chip internal voltage reference
On-chip Watchdog timer
On-chip power-on reset and supply monitor
On-chip voltage comparator
17 general purpose I/O
2
C, Enhanced UART, and Enhanced SPI serial interfaces implemented in hardware
DD
monitor, watchdog timer, and clock oscillator, the C8051F80x-83x
Rev. 1.0
C8051F80x-83x
15