MC9S08DZ60ACLF Freescale Semiconductor, MC9S08DZ60ACLF Datasheet - Page 62

• Manufacturer Part Number: MC9S08DZ60ACLF
• Description: IC MCU 60K FLASH 4K RAM 48-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08DZ60ACLF

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, LIN, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-LQFP
• Processor Series: S08DZ
• Core: HCS08
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: CAN, I2C, SCI, SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 2
• Operating Supply Voltage: 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWS08
• Development Tools By Supplier: DEMO9S08DZ60
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 24 Channel
• For Use With: DEMO9S08DZ60 - BOARD DEMOEVB9S08DZ60 - BOARD EVAL FOR 9S08DZ60
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 4 Memory
When the MMU detects that the CPU is addressing the Paging Window, the value currently in PPAGE will
be used to create an extended address that the MCU’s decode logic will use to select the desired FLASH
location. For example, the Flash from location 0x4000-0x7FFF can be accessed directly or using the
paging window, PPAGE = 1, address 0x8000-0xBFFF.
4.4.2.2
CALL and RTC are instructions that perform automated page switching when executed in the user
program. CALL is similar to a JSR instruction, but the subroutine that is called can be located anywhere
in the normal 64K address space or on any page of program memory.
During the execution of a CALL instruction, the CPU:
This sequence is not interruptible; there is no need to inhibit interrupts during CALL execution. A CALL
can be executed from any address in memory to any other address.
The new PPAGE value is provided by an immediate operand in the instruction along with the address
within the paging window, 0x8000-0xBFFF.
RTC is similar to an RTS instruction.
The RTC instruction terminates subroutines invoked by a CALL instruction.
During the execution of an RTC instruction, the CPU:
This sequence is not interruptible; there is no need to inhibit interrupts during RTC execution. An RTC
can be executed from any address in memory.
4.4.2.3
The linear address pointer registers, LAP2:LAP0 along with the linear data register allow the CPU to read
or write any address in the extended FLASH memory space. This linear address pointer may be used to
access data from any memory location while executing code from any location in extended memory,
including accessing data from a different PPAGE than the currently executing program.
To access data using the linear address pointer, the user would first setup the extended address in the 17-bit
address pointer, LAP2:LAP0. Accessing one of the three linear data registers LB, LBP and LWP will
access the extended memory location specified by LAP2:LAP0. The three linear data registers access the
memory locations in the same way, however the LBP and LWP will also increment LAP2:LAP0.
62
•
•
•
•
•
•
•
Stacks the return address.
Pushes the current PPAGE value onto the stack.
Writes the new instruction-supplied PPAGE value into the PPAGE register.
Transfers control to the subroutine of the new instruction-supplied address.
Pulls the old PPAGE value from the stack and loads it into the PPAGE register
Pulls the 16-bit return address from the stack and loads it into the PC
Resumes execution at the return address
CALL and RTC (Return from Call) Instructions
Data Space
MC9S08DZ128 Series Data Sheet, Rev. 1
Freescale Semiconductor