C8051F060-GQ Silicon Laboratories Inc, C8051F060-GQ Datasheet - Page 168

• Manufacturer Part Number: C8051F060-GQ
• Description: IC 8051 MCU 64K FLASH 100TQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F06xr

Specifications of C8051F060-GQ

• Program Memory Type: FLASH
• Program Memory Size: 64KB (64K x 8)
• Package / Case: 100-TQFP, 100-VQFP
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: CAN, EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 59
• Ram Size: 4.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 2x16b, 8x10b; D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: C8051F0x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 4.25 KB
• Interface Type: CAN/I2C/SMBus/SPI/UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 59
• Number Of Timers: 5
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F060DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• On-chip Dac: 2-ch x 12-bit
• No. Of I/o's: 59
• Ram Memory Size: 4352Byte
• Cpu Speed: 25MHz
• No. Of Timers: 5
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1214 - DEV KIT FOR F060/F062/F063
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1213

C8051F060/1/2/3/4/5/6/7
168
Bit7:
Bit6:
Bit5:
Bit4:
Bit3:
Bit2:
Bit1:
Bit0:
Bit7
R
-
Reserved.
CNVRSEF: Convert Start Reset Source Enable and Flag
Write:
Read:
C0RSEF: Comparator0 Reset Enable and Flag.
Write:
Read:
SWRSF: Software Reset Force and Flag.
Write:
Read:
WDTRSF: Watchdog Timer Reset Flag.
MCDRSF: Missing Clock Detector Flag.
Write:
Read:
PORSF: Power-On Reset Flag.
Write:
this bit can be written to select or de-select the VDD monitor as a reset source.
Important: At power-on, the VDD monitor is enabled/disabled using the external VDD
monitor enable pin (MONEN). The PORSF bit does not disable or enable the VDD monitor
circuit. It simply selects the VDD monitor as a reset source.
Read:
reset or a VDD monitor reset. In either case, data memory should be considered indeterminate
following the reset.
Note: When this flag is read as '1', all other reset flags are indeterminate.
PINRSF: HW Pin Reset Flag.
Write:
Read:
CNVRSEF
R/W
Bit6
0: CNVSTR2 is not a reset source.
1: CNVSTR2 is a reset source (active low).
0: Source of prior reset was not CNVSTR2.
1: Source of prior reset was CNVSTR2.
0: Comparator0 is not a reset source.
1: Comparator0 is a reset source (active low).
0: Source of last reset was not Comparator0.
1: Source of last reset was Comparator0.
0: No effect.
1: Forces an internal reset. /RST pin is not effected.
0: Source of last reset was not a write to the SWRSF bit.
1: Source of last reset was a write to the SWRSF bit.
0: Source of last reset was not WDT timeout.
1: Source of last reset was WDT timeout.
0: Missing Clock Detector disabled.
1: Missing Clock Detector enabled; triggers a reset if a missing clock condition is
0: Source of last reset was not a Missing Clock Detector timeout.
1: Source of last reset was a Missing Clock Detector timeout.
If the VDD monitor circuitry is enabled (by tying the MONEN pin to a logic high state),
0: De-select the VDD monitor as a reset source.
1: Select the VDD monitor as a reset source.
This bit is set whenever a power-on reset occurs. This may be due to a true power-on
0: Source of last reset was not a power-on or VDD monitor reset.
1: Source of last reset was a power-on or VDD monitor reset.
0: No effect.
1: Forces a Power-On Reset. /RST is driven low.
0: Source of prior reset was not /RST pin.
1: Source of prior reset was /RST pin.
detected.
C0RSEF
R/W
Bit5
Figure 14.4. RSTSRC: Reset Source Register
SWRSEF
R/W
Bit4
WDTRSF
Rev. 1.2
Bit3
R
MCDRSF
R/W
Bit2
PORSF
R/W
Bit1
SFR Address:
PINRSF
SFR Page:
R/W
Bit0
0xEF
0
Reset Value
00000000