SAK-C164CI-8E25M DB Infineon Technologies, SAK-C164CI-8E25M DB Datasheet - Page 24
![IC MCU 16BIT 64KB OTP MQFP-80-1](/photos/12/23/122352/sak-c164ci-8e25m_db_sml.jpg)
SAK-C164CI-8E25M DB
Manufacturer Part Number
SAK-C164CI-8E25M DB
Description
IC MCU 16BIT 64KB OTP MQFP-80-1
Manufacturer
Infineon Technologies
Series
C16xxr
Datasheet
1.SAF-C164CI-8EM_CB.pdf
(79 pages)
Specifications of SAK-C164CI-8E25M DB
Core Processor
C166
Core Size
16-Bit
Speed
25MHz
Connectivity
CAN, EBI/EMI, SPI, SSC, UART/USART
Peripherals
POR, PWM, WDT
Number Of I /o
59
Program Memory Size
64KB (64K x 8)
Program Memory Type
OTP
Ram Size
4K x 8
Voltage - Supply (vcc/vdd)
4.75 V ~ 5.5 V
Data Converters
A/D 8x10b
Oscillator Type
External
Operating Temperature
-40°C ~ 125°C
Package / Case
80-SQFP
Data Bus Width
16 bit
Data Ram Size
4 KB
Interface Type
ASC, CAN, SSC
Maximum Clock Frequency
25 MHz
Number Of Programmable I/os
59
Number Of Timers
3
Maximum Operating Temperature
+ 125 C
Mounting Style
SMD/SMT
Minimum Operating Temperature
- 40 C
On-chip Adc
10 bit, 8 Channel
Packages
PG-MQFP-80
Max Clock Frequency
25.0 MHz
Sram (incl. Cache)
4.0 KByte
Can Nodes
1
A / D Input Lines (incl. Fadc)
8
Program Memory
64.0 KByte
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / Rohs Status
Details
Other names
K164CI8E25MDBNP
K164CI8E25MDBXP
SAK-C164CI-8E25MDB
SAK-C164CI-8E25MDB
SAK-C164CI-8E25MDBIN
SAKC164CI8E25MDBX
SP000104057
K164CI8E25MDBXP
SAK-C164CI-8E25MDB
SAK-C164CI-8E25MDB
SAK-C164CI-8E25MDBIN
SAKC164CI8E25MDBX
SP000104057
The Capture/Compare Unit CAPCOM2
The general purpose CAPCOM2 unit supports generation and control of timing
sequences on up to 8 channels with a maximum resolution of 16 TCL. The CAPCOM
units are typically used to handle high speed I/O tasks such as pulse and waveform
generation, pulse width modulation (PMW), Digital to Analog (D/A) conversion, software
timing, or time recording relative to external events.
Two 16-bit timers (T7/T8) with reload registers provide two independent time bases for
the capture/compare register array.
Each dual purpose capture/compare register, which may be individually allocated to
either CAPCOM timer and programmed for capture or compare function, has one port
pin associated with it which serves as an input pin for triggering the capture function, or
as an output pin to indicate the occurrence of a compare event.
When a capture/compare register has been selected for capture mode, the current
contents of the allocated timer will be latched (‘capture’d) into the capture/compare
register in response to an external event at the port pin which is associated with this
register. In addition, a specific interrupt request for this capture/compare register is
generated. Either a positive, a negative, or both a positive and a negative external signal
transition at the pin can be selected as the triggering event. The contents of all registers
which have been selected for one of the five compare modes are continuously compared
with the contents of the allocated timers. When a match occurs between the timer value
and the value in a capture/compare register, specific actions will be taken based on the
selected compare mode.
Table 5
Compare Modes
Mode 0
Mode 1
Mode 2
Mode 3
Double
Register Mode
Data Sheet
Compare Modes (CAPCOM2)
Function
Interrupt-only compare mode;
several compare interrupts per timer period are possible
Pin toggles on each compare match;
several compare events per timer period are possible
Interrupt-only compare mode;
only one compare interrupt per timer period is generated
Pin set ‘1’ on match; pin reset ‘0’ on compare time overflow;
only one compare event per timer period is generated
Two registers operate on one pin; pin toggles on each compare
match;
several compare events per timer period are possible.
Registers CC16 & CC24 © pin CC16IO
Registers CC17 & CC25 © pin CC17IO
Registers CC18 & CC26 © pin CC18IO
Registers CC19 & CC27 © pin CC19IO
20
C164CL/SL
V2.0, 2001-05
C164CI/SI