C8051T602-GS Silicon Laboratories Inc, C8051T602-GS Datasheet - Page 86

• Manufacturer Part Number: C8051T602-GS
• Description: IC 8051 MCU 4K-EEPROM 14-SOIC
• Manufacturer: Silicon Laboratories Inc
• Series: C8051T60xr

Specifications of C8051T602-GS

• Program Memory Type: OTP
• Program Memory Size: 4KB (4K x 8)
• Package / Case: 14-SOIC (3.9mm Width), 14-SOL
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), UART/USART
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: C8051T6x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: I2C/SMBus/UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 8
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051T600DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1404 - KIT DEV FOR C8051T60X MCU'S
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1655-5

C8051T600/1/2/3/4/5/6
SFR Definition 17.4. EIP1: Extended Interrupt Priority 1
SFR Address = 0xF6
86
Name
Reset
7:6
Bit
Type
5
4
3
2
1
0
Bit
PWADC0 ADC0 Window Comparator Interrupt Priority Control.
Unused
PCP0R
PSMB0
PCP0F
PPCA0
PADC0
Name
R
7
1
Unused. Read = 11b; Write = Don’t Care.
Comparator0 (CP0) Rising Edge Interrupt Priority Control.
This bit sets the priority of the CP0 rising edge interrupt.
0: CP0 rising edge interrupt set to low priority level.
1: CP0 rising edge interrupt set to high priority level.
Comparator0 (CP0) Falling Edge Interrupt Priority Control.
This bit sets the priority of the CP0 falling edge interrupt.
0: CP0 falling edge interrupt set to low priority level.
1: CP0 falling edge interrupt set to high priority level.
Programmable Counter Array (PCA0) Interrupt Priority Control.
This bit sets the priority of the PCA0 interrupt.
0: PCA0 interrupt set to low priority level.
1: PCA0 interrupt set to high priority level.
ADC0 Conversion Complete Interrupt Priority Control.
This bit sets the priority of the ADC0 Conversion Complete interrupt.
0: ADC0 Conversion Complete interrupt set to low priority level.
1: ADC0 Conversion Complete interrupt set to high priority level.
This bit sets the priority of the ADC0 Window interrupt.
0: ADC0 Window interrupt set to low priority level.
1: ADC0 Window interrupt set to high priority level.
SMBus (SMB0) Interrupt Priority Control.
This bit sets the priority of the SMB0 interrupt.
0: SMB0 interrupt set to low priority level.
1: SMB0 interrupt set to high priority level.
R
6
1
PCP0R
R/W
5
0
PCP0F
R/W
Rev. 1.2
4
0
Function
PPCA0
R/W
3
0
PADC0
R/W
2
0
PWADC0
R/W
1
0
PSMB0
R/W
0
0