MC9S08QG84CDTE Freescale Semiconductor, MC9S08QG84CDTE Datasheet - Page 139

• Manufacturer Part Number: MC9S08QG84CDTE
• Description: IC MCU 8BIT 8K FLASH 16-TSSOP
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08QG84CDTE

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 12
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 16-TSSOP
• Controller Family/series: HCS08
• No. Of I/o's: 12
• Ram Memory Size: 512Byte
• Cpu Speed: 20MHz
• No. Of Timers: 2
• Embedded Interface Type: I2C, SCI, SPI
• Rohs Compliant: Yes
• For Use With: DEMO9S08QG8E - BOARD DEMO FOR MC9S08QG8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

9.6
This section contains information for using the ADC module in applications. The ADC has been designed
to be integrated into a microcontroller for use in embedded control applications requiring an A/D
converter.
9.6.1
The following sections discuss the external pins associated with the ADC module and how they should be
used for best results.
9.6.1.1
The ADC module has analog power and ground supplies (V
separate pins on some devices. On other devices, V
and on others, both V
are separate pads for the analog supplies which are bonded to the same pin as the corresponding digital
supply so that some degree of isolation between the supplies is maintained.
When available on a separate pin, both V
as their corresponding MCU digital supply (V
noise immunity and bypass capacitors placed as near as possible to the package.
Freescale Semiconductor
Application Information
External Pins and Routing
Analog Supply Pins
SSAD
and V
Figure 9-14. Initialization Flowchart for Example
MC9S08QG8 and MC9S08QG4 Data Sheet, Rev. 5
DDAD
are shared with the MCU digital supply pins. In these cases, there
DDAD
CLEAR COCO BIT
THEN ADCRL TO
INITIALIZE ADC
ADCCFG = $98
ADCSC2 = $00
ADCSC1 = $41
READ ADCRH
CONTINUE
COCO=1?
DD
and V
CHECK
RESET
and V
SSAD
YES
SSAD
SS
is shared on the same pin as the MCU digital V
must be connected to the same voltage potential
) and must be routed carefully for maximum
NO
DDAD
and V
Analog-to-Digital Converter (S08ADC10V1)
SSAD
) which are available as
SS
137
,