AT80C51RD2-SLRUM Atmel, AT80C51RD2-SLRUM Datasheet - Page 30

• Manufacturer Part Number: AT80C51RD2-SLRUM
• Description: IC MCU 80C51 HI PERFORM 44PLCC
• Manufacturer: Atmel
• Series: 80Cr

Specifications of AT80C51RD2-SLRUM

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Type: ROMless
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-PLCC
• Processor Series: AT80x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 1280 B
• Interface Type: UART, SPI
• Maximum Clock Frequency: 60 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Minimum Operating Temperature: - 40 C
• Package: 44PLCC
• Device Core: 8051
• Family Name: AT80
• Maximum Speed: 40 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details

10.1
Figure 10-3. PCA Capture Mode
10.2
30
PCA Capture Mode
16-bit Software Timer/ Compare Mode
AT80C51RD2
Cex.n
To use one of the PCA modules in the capture mode either one or both of the CCAPM bits
CAPN and CAPP for that module must be set. The external CEX input for the module (on port 1)
is sampled for a transition. When a valid transition occurs the PCA hardware loads the value of
the PCA counter registers (CH and CL) into the module's capture registers (CCAPnL and CCA-
PnH). If the CCFn bit for the module in the CCON SFR and the ECCFn bit in the CCAPMn SFR
are set then an interrupt will be generated (see Figure 10-3).
The PCA modules can be used as software timers by setting both the ECOM and MAT bits in
the modules CCAPMn register. The PCA timer will be compared to the module's capture regis-
ters and when a match occurs an interrupt will occur if the CCFn (CCON SFR) and the ECCFn
(CCAPMn SFR) bits for the module are both set (see Figure 10-4).
CF
ECOMn
CR
CAPPn
CAPNn MATn TOGn PWMn ECCFn
CCF4 CCF3 CCF2 CCF1 CCF0
Capture
CCAPMn, n= 0 to 4
0xDA to 0xDE
CCON
0xD8
CCAPnH
PCA Counter/Timer
CH
CCAPnL
CL
PCA IT
4113D–8051–01/09