ATMEGA8515L-8MUR Atmel, ATMEGA8515L-8MUR Datasheet - Page 174
![no-image](/images/manufacturer_photos/0/0/78/atmel_sml.jpg)
ATMEGA8515L-8MUR
Manufacturer Part Number
ATMEGA8515L-8MUR
Description
MCU AVR 8KB FLASH 8MHZ 44QFN
Manufacturer
Atmel
Series
AVR® ATmegar
Datasheet
1.ATMEGA8515L-8MC.pdf
(257 pages)
Specifications of ATMEGA8515L-8MUR
Core Processor
AVR
Core Size
8-Bit
Speed
8MHz
Connectivity
EBI/EMI, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, POR, PWM, WDT
Number Of I /o
35
Program Memory Size
8KB (4K x 16)
Program Memory Type
FLASH
Eeprom Size
512 x 8
Ram Size
512 x 8
Voltage - Supply (vcc/vdd)
2.7 V ~ 5.5 V
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
*
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Data Converters
-
- Current page: 174 of 257
- Download datasheet (2Mb)
Setting the Boot Loader Lock
bits by SPM
EEPROM Write Prevents
Writing to SPMCR
Reading the Fuse and Lock
bits from Software
174
ATmega8515(L)
To set the Boot Loader Lock bits, write the desired data to R0, write “X0001001” to
SPMCR and execute SPM within four clock cycles after writing SPMCR. The only
accessible Lock bits are the Boot Lock bits that may prevent the Application and Boot
Loader section from any software update by the MCU.
See Table 74 and Table 75 for how the different settings of the Boot Loader bits affect
the Flash access.
If bits 5..2 in R0 are cleared (zero), the corresponding Boot Lock bit will be programmed
if an SPM instruction is executed within four cycles after BLBSET and SPMEN are set in
SPMCR. The Z-pointer is don’t care during this operation, but for future compatibility it is
recommended to load the Z-pointer with $0001 (same as used for reading the Lock
bits). For future compatibility It is also recommended to set bits 7, 6, 1, and 0 in R0 to “1”
when writing the Lock bits. When programming the Lock bits the entire Flash can be
read during the operation.
Note that an EEPROM write operation will block all software programming to Flash.
Reading the Fuses and Lock bits from software will also be prevented during the
EEPROM write operation. It is recommended that the user checks the status bit (EEWE)
in the EECR Register and verifies that the bit is cleared before writing to the SPMCR
Register.
It is possible to read both the Fuse and Lock bits from software. To read the Lock bits,
load the Z-pointer with $0001 and set the BLBSET and SPMEN bits in SPMCR. When
an LPM instruction is executed within three CPU cycles after the BLBSET and SPMEN
bits are set in SPMCR, the value of the Lock bits will be loaded in the destination regis-
ter. The BLBSET and SPMEN bits will auto-clear upon completion of reading the Lock
bits or if no LPM instruction is executed within three CPU cycles or no SPM instruction is
executed within four CPU cycles. When BLBSET and SPMEN are cleared, LPM will
work as described in the Instruction set Manual.
The algorithm for reading the Fuse Low bits is similar to the one described above for
reading the Lock bits. To read the Fuse Low bits, load the Z-pointer with $0000 and set
the BLBSET and SPMEN bits in SPMCR. When an LPM instruction is executed within
three cycles after the BLBSET and SPMEN bits are set in the SPMCR, the value of the
Fuse Low bits (FLB) will be loaded in the destination register as shown below. Refer to
Table 84 on page 181 for a detailed description and mapping of the Fuse Low bits.
Similarly, when reading the Fuse High bits, load $0003 in the Z-pointer. When an LPM
instruction is executed within three cycles after the BLBSET and SPMEN bits are set in
the SPMCR, the value of the Fuse High bits (FHB) will be loaded in the destination reg-
ister as shown below. Refer to Table 83 on page 180 for detailed description and
mapping of the Fuse High bits.
Fuse and Lock bits that are programmed, will be read as zero. Fuse and Lock bits that
are unprogrammed, will be read as one.
Bit
R0
Bit
Rd
Bit
Rd
Bit
Rd
FHB7
FLB7
7
1
7
–
7
7
FLB6
FHB6
6
1
6
–
6
6
BLB12
BLB12
FHB5
FLB5
5
5
5
5
BLB11
BLB11
FHB4
FLB4
4
4
4
4
BLB02
BLB02
FHB3
FLB3
3
3
3
3
BLB01
BLB01
FHB2
FLB2
2
2
2
2
FHB1
FLB1
LB2
1
1
1
1
1
FLB0
FHB0
LB1
2512K–AVR–01/10
0
1
0
0
0
Related parts for ATMEGA8515L-8MUR
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![ATmega8515](/images/manufacturer_photos/0/0/79/atmel_corporation_tmb.jpg)
Part Number:
Description:
Manufacturer:
Atmel Corporation
Datasheet:
![ATMEGA8515-16MU](/photos/12/13/121316/313-44-qfn_tmb.jpg)
Part Number:
Description:
IC AVR MCU 8K 16MHZ 5V 44-QFN
Manufacturer:
Atmel
Datasheet:
![ATMEGA8515-16AU](/photos/6/70/67042/313-44-tqfp_tmb.jpg)
Part Number:
Description:
IC AVR MCU 8K 16MHZ 5V 44TQFP
Manufacturer:
Atmel
Datasheet:
![ATMEGA8515-16PU](/photos/6/70/67049/453-40-dip_tmb.jpg)
Part Number:
Description:
IC AVR MCU 8K 16MHZ 5V 40DIP
Manufacturer:
Atmel
Datasheet:
![ATMEGA8515-16AC](/photos/6/70/67042/313-44-tqfp_tmb.jpg)
Part Number:
Description:
IC AVR MCU 8K 16MHZ COM 44-TQFP
Manufacturer:
Atmel
Datasheet:
![ATMEGA8515-16PI](/photos/6/70/67049/453-40-dip_tmb.jpg)
Part Number:
Description:
IC AVR MCU 8K 16MHZ IND 40-DIP
Manufacturer:
Atmel
Datasheet:
![ATMEGA8515-16JI](/photos/6/70/67043/453-44-plcc_tmb.jpg)
Part Number:
Description:
IC AVR MCU 8K 16MHZ IND 44-PLCC
Manufacturer:
Atmel
Datasheet:
![ATMEGA8515-16AI](/photos/6/70/67042/313-44-tqfp_tmb.jpg)
Part Number:
Description:
IC AVR MCU 8K 16MHZ IND 44-TQFP
Manufacturer:
Atmel
Datasheet:
![ATMEGA8515-16AUR](/images/manufacturer_photos/0/0/78/atmel_tmb.jpg)
Part Number:
Description:
MCU AVR 8KB FLASH 16MHZ 44TQFP
Manufacturer:
Atmel
Datasheet:
![ATMEGA8515-16MUR](/images/manufacturer_photos/0/0/78/atmel_tmb.jpg)
Part Number:
Description:
MCU AVR 8KB FLASH 16MHZ 44QFN
Manufacturer:
Atmel
Datasheet:
![ATMEGA8515-16JUR](/images/manufacturer_photos/0/0/78/atmel_tmb.jpg)
Part Number:
Description:
MCU AVR 8KB FLASH 16MHZ 44PLCC
Manufacturer:
Atmel
Datasheet:
![ATMEGA8515-16JU](/photos/6/70/67043/453-44-plcc_tmb.jpg)
Part Number:
Description:
IC MCU AVR 8K 16MHZ IND 44-PLCC
Manufacturer:
Atmel
Datasheet:
![ATMEGA8515-16PC](/photos/6/70/67049/453-40-dip_tmb.jpg)
Part Number:
Description:
IC AVR MCU 8K 16MHZ COM 40-DIP
Manufacturer:
Atmel
Datasheet: