PIC16C717-I/SO Microchip Technology, PIC16C717-I/SO Datasheet - Page 22

• Manufacturer Part Number: PIC16C717-I/SO
• Description: IC MCU OTP 2KX14 A/D PWM 18SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C717-I/SO

• Core Size: 8-Bit
• Program Memory Size: 3.5KB (2K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI
• Number Of I /o: 15
• Program Memory Type: OTP
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 18-SOIC (7.5mm Width)
• Controller Family/series: PIC16C
• No. Of I/o's: 16
• Ram Memory Size: 256Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Processor Series: PIC16C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: I2C, SPI, SSP
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 3 bit
• Operating Supply Voltage: 2.5 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000, DM163022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 6 bit
• Data Rom Size: 256 B
• Height: 2.31 mm
• Length: 11.53 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4 V
• Width: 7.49 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: PIC16C717I/SO

PIC16C717/770/771
2.2.2.7
This register contains the SSP Bus Collision and low-
voltage detect interrupt flag bits.
REGISTER 2-7:
DS41120B-page 20
bit 7
bit 6-4
bit 3
bit 2-0
PIR2 REGISTER
PERIPHERAL INTERRUPT REGISTER 2 (PIR2: 0Dh)
bit 7
LVDIF: Low Voltage Detect Interrupt Flag bit
1 = The supply voltage has fallen below the specified LVD voltage (must be cleared in software)
0 = The supply voltage is greater than the specified LVD voltage
Unimplemented: Read as '0'
BCLIF: Bus Collision Interrupt Flag bit
1 = A bus collision has occurred while the SSP module configured in I
0 = No bus collision occurred
Unimplemented: Read as '0'
Legend:
R = Readable bit
- n = Value at POR
R/W-0
LVDIF
transmitting (must be cleared in software)
U-0
—
U-0
—
W = Writable bit
’1’ = Bit is set
U-0
—
.
Note:
R/W-0
BCLIF
U = Unimplemented bit, read as ‘0’
’0’ = Bit is cleared
Interrupt flag bits get set when an interrupt
condition occurs, regardless of the state of
its corresponding enable bit or the global
enable bit, GIE (INTCON<7>). User soft-
ware should ensure the appropriate inter-
rupt flag bits are clear prior to enabling an
interrupt.
U-0
—
2002 Microchip Technology Inc.
2
C Master was
x = Bit is unknown
U-0
—
U-0
—
bit 0