PIC18F65J10-I/PT Microchip Technology, PIC18F65J10-I/PT Datasheet - Page 25

• Manufacturer Part Number: PIC18F65J10-I/PT
• Description: IC PIC MCU FLASH 16KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F65J10-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 32KB (16K x 16)
• Package / Case: 64-TFQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 50
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SPI/I2C/EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 50
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183022, DM183032
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 11-ch x 10-bit
• Package: 64TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180015 - MODULE PLUG-IN 18F87J10 FOR HPCAC162062 - HEADER INTRFC MPLAB ICD2 64/80PAC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

TABLE 5-3:
 2009 Microchip Technology Inc.
WDTPS<3:0>
WAIT
BW
EMB<1:0>
EASHFT
RTCSOSC
MSSPSEL
PMPMX
ECCPMX
CCP2MX
Note 1:
Bit Name
2:
3:
4:
(1,2,3)
(1,2)
Implemented in PIC18FXXJ5X devices only.
Implemented in PIC18F66J11/66J16/67J11/86J11/86J16/87J11 devices only.
Implemented in 80-pin devices only.
Implemented in PIC18FX6J9X and PIC18FX7J9X.
(4)
PIC18F6XJXX/8XJXX BIT DESCRIPTIONS (CONTINUED)
Configuration
CONFIG2H
CONFIG3H
CONFIG3H
CONFIG3H
CONFIG3H
CONFIG3L
CONFIG3L
CONFIG3L
CONFIG3L
CONFIG3L
Words
Watchdog Timer Postscale Select bits
1111 = 1:32,768
1110 = 1:16,384
1101 = 1:8,192
1100 = 1:4,096
1011 = 1:2,048
1010 = 1:1,024
1001 = 1:512
1000 = 1:256
0111 = 1:128
0110 = 1:64
0101 = 1:32
0100 = 1:16
0011 = 1:8
0010 = 1:4
0001 = 1:2
0000 = 1:1
External Bus Wait Enable bit
1 = Wait states for operations on external memory bus disabled
0 = Wait states for operations on external memory bus enabled
Data Bus Width Select bit
1 = 16-Bit External Bus mode
0 = 8-Bit External Bus mode
External Memory Bus Configuration bits
00 = Extended Microcontroller mode, 20-Bit Addressing mode
01 = Extended Microcontroller mode,16-Bit Addressing mode
10 = Extended Microcontroller mode,12-Bit Addressing mode
11 = Microcontroller mode – external bus disabled
External Address Bus Shift Enable bit
1 = Address shifting enabled; address on external bus is offset to start at 000000h
0 = Address shifting disabled; address on external bus reflects the PC value
RTCC Reference Clock Select bit
1 = RTCC uses T1OSC/SOSC as a reference clock
0 = RTCC uses INTOSC/LPRC as a reference clock
MSSP Address Select bit
1 = 7-Bit Address Mask mode
0 = 5-Bit Address Mask mode
PMP Pin Select bit
1 = PMP port pins connected to EMB
0 = PMP port pins not connected to EMB
ECCP MUX bit
1 = ECCP1 outputs (P1B/P1C) are multiplexed with RE6 and RE5;
0 = ECCP1 outputs (P1B/P1C) are multiplexed with RH7 and RH6;
CCP2 MUX bit
1 = ECCP2/P2A is multiplexed with RC1
0 = ECCP2/P2A is multiplexed with RE7 in Microcontroller mode (all devices)
ECCP3 outputs (P3B/P3C) are multiplexed with RE4 and RE3
ECCP3 outputs (P3B/P3C) are multiplexed with RH5 and RH4
or with RB3 in Extended Microcontroller mode (80-pin devices only)
PIC18F6XJXX/8XJXX
Description
DS39644L-page 25