PIC18LF27J53-I/ML Microchip Technology, PIC18LF27J53-I/ML Datasheet - Page 326

• Manufacturer Part Number: PIC18LF27J53-I/ML
• Description: IC PIC MCU 128KB FLASH 28QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF27J53-I/ML

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 2.75 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Digital Ic Case Style: QFN
• Supply Voltage Range: 1.8V To 3.6V
• Embedded Interface Type: I2C, SPI, USART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC18(L)F2X/4XK22
EXAMPLE 19-4:
DS41412D-page 326
#include "p18cxxx.h"
#define COUNT 500
#define DELAY for(i=0;i<COUNT;i++)
#define OPENSW 1000
#define TRIP 300
#define HYST 65
#define PRESSED 1
#define UNPRESSED 0
int main(void)
{
}
unsigned int Vread;
unsigned int switchState;
int i;
//assume CTMU and A/D have been set up correctly
//see Example 25-1 for CTMU & A/D setup
setup();
CTMUCONHbits.CTMUEN = 1;
CTMUCONLbits.EDG1STAT = 0;
CTMUCONLbits.EDG2STAT = 0;
CTMUCONHbits.IDISSEN = 1;
DELAY;
CTMUCONHbits.IDISSEN = 0;
CTMUCONLbits.EDG1STAT = 1;
DELAY;
CTMUCONLbits.EDG1STAT = 0;
PIR1bits.ADIF = 0;
ADCON0bits.GO=1;
while(!PIR1bits.ADIF);
Vread = ADRES;
if(Vread < OPENSW - TRIP)
{
}
else if(Vread > OPENSW - TRIP + HYST)
{
}
switchState = PRESSED;
switchState = UNPRESSED;
ROUTINE FOR CAPACITIVE TOUCH SWITCH
//@ 8MHz = 125uS.
//Un-pressed switch value
//Difference between pressed
//and un-pressed switch
//amount to change
//from pressed to un-pressed
//storage for reading
// Enable the CTMU
// Set Edge status bits to zero
//drain charge on the circuit
//wait 125us
//end drain of circuit
//Begin charging the circuit
//using CTMU current source
//wait for 125us
//Stop charging circuit
//make sure A/D Int not set
//and begin A/D conv.
//Wait for A/D convert complete
//Get the value from the A/D
Preliminary
 2010 Microchip Technology Inc.