PIC24FJ64GB002-I/ML Microchip Technology, PIC24FJ64GB002-I/ML Datasheet - Page 120

• Manufacturer Part Number: PIC24FJ64GB002-I/ML
• Description: IC MCU 16BIT 64KB FLASH 28QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24FJ64GB002-I/ML

• Program Memory Type: FLASH
• Program Memory Size: 64KB (22K x 24)
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 19
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C/IrDA/SPI/UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 19
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DM240011
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 9-ch x 10-bit
• Controller Family/series: PIC24
• Ram Memory Size: 8KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Embedded Interface Type: I2C, LIN, SPI, UART, USB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24FJ64GB004 FAMILY
9.2.4.10
V
ing from Deep Sleep functionally looks like a POR, the
technique described in Section 9.2.4.9 “Checking
and Clearing the Status of Deep Sleep” should be
used to distinguish between Deep Sleep and a true
POR event.
When a true POR occurs, the entire device, including
all Deep Sleep logic (Deep Sleep registers, RTCC,
DSWDT, etc.) is reset.
DS39940C-page 118
DD
voltage is monitored to produce PORs. Since exit-
Power-on Resets (
PORs
)
Preliminary
9.2.4.11
To review, these are the necessary steps involved in
invoking and exiting Deep Sleep mode:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. The DSEN bit is automatically cleared.
11. Read and clear the DPSLP status bit in RCON,
12. Read the DSGPRx registers (optional).
13. Once all state related configurations are
14. Application resumes normal operation.
Device exits Reset and begins to execute its
application code.
If DSWDT functionality is required, program the
appropriate Configuration bit.
Select the appropriate clock(s) for the DSWDT
and RTCC (optional).
Enable and configure the RTCC (optional).
Write context data to the DSGPRx registers
(optional).
Enable the INT0 interrupt (optional).
Set the DSEN bit in the DSCON register.
Enter Deep Sleep by issuing a PWRSV
#SLEEP_MODE command.
Device exits Deep Sleep when a wake-up event
occurs.
and the DSWAKE status bits.
complete, clear the RELEASE bit.
Summary of Deep Sleep Sequence
© 2009 Microchip Technology Inc.