DSPIC33FJ64GP204-I/PT Microchip Technology, DSPIC33FJ64GP204-I/PT Datasheet - Page 197

• Manufacturer Part Number: DSPIC33FJ64GP204-I/PT
• Description: IC DSPIC MCU/DSP 64K 44-TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ64GP204-I/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 13x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Core Frequency: 40MHz
• Embedded Interface Type: ECAN, I2C, SPI, UART
• No. Of I/o's: 35
• Flash Memory Size: 64KB
• Supply Voltage Range: 3V To 3.6V
• Operating Temperature Range: -40°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

15.0
FIGURE 15-1:
© 2011 Microchip Technology Inc.
dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04, AND dsPIC33FJ128GPX02/X04
Note 1: This data sheet summarizes the features
2: Some registers and associated bits
OUTPUT COMPARE
of
dsPIC33FJ64GPX02/X04,
dsPIC33FJ128GPX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to “Section 13. Output
Compare” (DS70209) of the “dsPIC33F/
PIC24H
which is available from the Microchip
website (www.microchip.com).
described in this section may not be avail-
able on all devices. Refer to
“Memory Organization”
sheet for device-specific register and bit
information.
the
16
TMR2
OUTPUT COMPARE MODULE BLOCK DIAGRAM
Family
Comparator
0
OCxRS
OCxR
dsPIC33FJ32GP302/304,
TMR3
1
Reference
16
OCTSEL
in this data
Section 4.0
Manual”,
Rollover
TMR2
and
0
Rollover
TMR3
1
Mode Select
OCM<2:0>
The Output Compare module can select either Timer2
or Timer3 for its time base. The module compares the
value of the timer with the value of one or two compare
registers depending on the operating mode selected.
The state of the output pin changes when the timer
value matches the compare register value. The Output
Compare module generates either a single output
pulse or a sequence of output pulses, by changing the
state of the output pin on the compare match events.
The Output Compare module can also generate
interrupts on compare match events.
The Output Compare module has multiple operating
modes:
• Active-Low One-Shot mode
• Active-High One-Shot mode
• Toggle mode
• Delayed One-Shot mode
• Continuous Pulse mode
• PWM mode without Fault protection
• PWM mode with Fault protection
Output
Logic
3
Set Flag bit
OCxIF
Output
Enable
R
S
Q
Enable
Output
Logic
DS70292E-page 197
OCx
OCFA