PIC16LC74B-04I/PQ Microchip Technology, PIC16LC74B-04I/PQ Datasheet - Page 24

• Manufacturer Part Number: PIC16LC74B-04I/PQ
• Description: IC MCU OTP 4KX14 A/D PWM 44-MQFP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16LC74B-04I/PQ

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Size: 7KB (4K x 14)
• Program Memory Type: OTP
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 5x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-MQFP, 44-PQFP
• Processor Series: PIC16LC
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 192 B
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 33
• Number Of Timers: 8
• Operating Supply Voltage: 2.5 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000, DM163022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC16C63A/65B/73B/74B
4.2.2.6
This register contains the individual enable bit for the
CCP2 peripheral interrupt.
REGISTER 4-6:
4.2.2.7
This register contains the CCP2 interrupt flag bit.
REGISTER 4-7:
DS30605C-page 24
bit 7-1
bit 0
bit 7-1
bit 0
PIE2 Register
PIR2 Register
PIE2 REGISTER (ADDRESS 8Dh)
PIR2 REGISTER (ADDRESS 0Dh)
Unimplemented: Read as '0'
CCP2IE: CCP2 Interrupt Enable bit
1 = Enables the CCP2 interrupt
0 = Disables the CCP2 interrupt
Legend:
R = Readable bit
-n = Value at POR
Unimplemented: Read as '0'
CCP2IF: CCP2 Interrupt Flag bit
Capture mode:
1 = A TMR1 register capture occurred (must be cleared in software)
0 = No TMR1 register capture occurred
Compare mode:
1 = A TMR1 register compare match occurred (must be cleared in software)
0 = No TMR1 register compare match occurred
PWM mode:
Unused
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 7
U-0
U-0
—
—
U-0
U-0
—
—
W = Writable bit
’1’ = Bit is set
W = Writable bit
’1’ = Bit is set
U-0
U-0
—
—
U-0
U-0
—
—
Note:
U = Unimplemented bit, read as ‘0’
’0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
’0’ = Bit is cleared
Interrupt flag bits are set when an interrupt
condition occurs, regardless of the state of
its corresponding enable bit, or the global
enable bit, GIE (INTCON<7>). User soft-
ware should ensure the appropriate inter-
rupt flag bits are clear prior to enabling an
interrupt
U-0
U-0
—
—
.
U-0
U-0
—
—
2000 Microchip Technology Inc.
x = Bit is unknown
x = Bit is unknown
U-0
U-0
—
—
CCP2IE
CCP2IF
R/W-0
R/W-0
bit 0
bit 0