ST7FLITE39F2M3 STMicroelectronics, ST7FLITE39F2M3 Datasheet - Page 15

• Manufacturer Part Number: ST7FLITE39F2M3
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE39F2M3

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-8406 - BOARD STF20NM50FD/STF7LITE39BF2497-8403 - BOARD DEMO STCC08 AC SW DETECTOR497-6398 - BOARD EVAL ST7FLITE39/STM1403497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5514 - EVAL BOARD THERMO CONTROL REFRIG497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Example
5.2 WORKSPACE
This folder contains configuration and workspace files for both STVD7 ver2.x and 3.x as per
the directory structure shown in figure 2.
Note:
1. For ST72F561 demo and CAN peripheral, winIDEA workspace is also available.
2. For ST72325 and ST7232A demo STVD7_3X workspace is only available.
5.2.1 STVD7_2x
This folder contains relevant configuration files for ST7 Visual Debug ver 2.x. Subdirectories:
Config, Object
Config Folder: Contains the configuration files for both Metrowerks and Cosmic compilers.
metrowerks: Contains the mapping file (ST72xxx.prm) for all the hardware registers in the de-
vice, the Make file (ST72xxx.mak) for building the application and the default.env file which
defines all the useful paths names and options for the application.
COSMIC: Contains the make file for building the application (ST72xxx.mak), the link file
(ST72xxx.lkf) used to link the device and the interrupt mapping file (vector_xxx.c) for the target
device.
Object Folder:
These folders are used for temporary storage of object and executable files generated by the
compiler in respective directories - metrowerks and cosmic.
5.2.2 STVD7_3x
This folder contains relevant Cosmic and Metrowerks workspace for ST7 Visual Debug ver
3.X, as the configuration files are automatically generated.
5.2.3 winIDEA (only for ST72F561 and CAN peripheral)
This folder contains relevant configuration files for winIDEA.
Subdirectories: Config, Object
For details related to Subdirectories refer to
Section 5.2.1
15/235