STR731FV2T6 STMicroelectronics, STR731FV2T6 Datasheet - Page 37

• Manufacturer Part Number: STR731FV2T6
• Description: MCU 32BIT 256KB FLASH 100-TQFP
• Manufacturer: STMicroelectronics
• Series: STR7r

Specifications of STR731FV2T6

• Core Processor: ARM7
• Core Size: 32-Bit
• Speed: 36MHz
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Processor Series: STR731x
• Core: ARM7TDMI
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: CAN/I2C/SPI/UART
• Maximum Clock Frequency: 36 MHz
• Number Of Programmable I/os: 72
• Number Of Timers: 9
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWARM, EWARM-BL, MCBSTR730, KSK-STR731-PL, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: STR730-SK/HIT, STR730-SK/RAIS, STR731-SK/IAR, STR730-EVAL, STX-PRO/RAIS, STX-RLINK, STR79-RVDK/CPP, STR79-RVDK, STR79-RVDK/UPG
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12-ch x 10-bit
• For Use With: 497-5046 - KIT TOOL FOR ST7/UPSD/STR7 MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-5646

STR73xFxx
●
Table 22.
1. Class description: A Class is an STMicroelectronics internal specification. All its limits are higher than the
Symbol
DLU
LU
JEDEC specifications, that means when a device belongs to Class A it exceeds the JEDEC standard. B
Class strictly covers all the JEDEC criteria (international standard).
sample. This test conforms to the EIA/JESD 78 IC latch-up standard. For more details,
refer to the application note AN1181.
DLU: Electrostatic discharges (one positive then one negative test) are applied to each
pin of 3 samples when the micro is running to assess the latch-up performance in
dynamic mode. Power supplies are set to the typical values, the oscillator is connected
as near as possible to the pins of the micro and the component is put in reset mode.
This test conforms to the IEC1000-4-2 and SAEJ1752/3 standards. For more details,
refer to the application note AN1181.
Static latch-up class
Dynamic latch-up class
Electrical sensitivities
Parameter
T
T
T
V
T
A
A
A
A
DD
=+25°C
=+85°C
=+105°C
= +25° C
= 5.5 V, f
OSC4M
Conditions
= 4 MHz, f
MCLK
= 32 MHz,
Electrical parameters
Class
A
A
A
A
37/52
1)