ST10F276-4T3 STMicroelectronics, ST10F276-4T3 Datasheet - Page 98

• Manufacturer Part Number: ST10F276-4T3
• Description: MCU 16BIT 832K FLASH 144-LQFP
• Manufacturer: STMicroelectronics
• Series: ST10r

Specifications of ST10F276-4T3

• Core Processor: ST10
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: ASC, CAN, EBI/EMI, I²C, SSC, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 111
• Program Memory Size: 832KB (832K x 8)
• Program Memory Type: FLASH
• Ram Size: 68K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 24x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

I2C interface
15
98/231
I2C interface
The integrated I
two-line SDA/SCL in accordance with the I
operate in slave mode, in master mode or in multi-master mode. It can receive and transmit
data using 7-bit or 10-bit addressing. Data can be transferred at speeds up to 400 Kbit/s
(both Standard and Fast I
The module can generate three different types of interrupt:
●
●
●
These requests are issued to the interrupt controller by three different lines, and identified as
Error, Transmit, and Receive interrupt lines.
When the I
P4.7 (where SCL and SDA are respectively mapped as alternate functions) are
automatically configured as bidirectional open-drain: the value of the external pull-up
resistor depends on the application. P4, DP4 and ODP4 cannot influence the pin
configuration.
When the I
controlled by P4, DP4 and ODP4.
The speed of the I
Fast I
Requests related to bus events, like start or stop events, arbitration lost, etc.
Requests related to data transmission
Requests related to data reception
2
C mode (100 to 400 kHz).
2
2
C module is enabled by setting bit XI2CEN in XPERCON register, pins P4.4 and
C cell is disabled (clearing bit XI2CEN), P4.4 and P4.7 pins are standard I/ O
2
C Bus Module handles the transmission and reception of frames over the
2
C interface may be selected between Standard mode (0 to 100 kHz) and
2
C bus modes are supported).
2
C Bus specification. The I
2
C Module can
ST10F276E