C8051F334-GMR Silicon Laboratories Inc, C8051F334-GMR Datasheet - Page 25

no-image

C8051F334-GMR

Manufacturer Part Number
C8051F334-GMR
Description
IC 8051 MCU 2K FLASH 20MLP
Manufacturer
Silicon Laboratories Inc
Series
C8051F33xr
Datasheets

Specifications of C8051F334-GMR

Core Processor
8051
Core Size
8-Bit
Speed
25MHz
Connectivity
SMBus (2-Wire/I²C), SPI, UART/USART
Peripherals
POR, PWM, Temp Sensor, WDT
Number Of I /o
17
Program Memory Size
2KB (2K x 8)
Program Memory Type
FLASH
Ram Size
768 x 8
Voltage - Supply (vcc/vdd)
2.7 V ~ 3.6 V
Data Converters
A/D 16x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
20-QFN
For Use With
336-1451 - ADAPTER PROGRAM TOOLSTICK F330
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
C8051F334-GMR
Manufacturer:
ZILLTEK
Quantity:
3 340
Part Number:
C8051F334-GMR
Manufacturer:
SILICON LABS/芯科
Quantity:
20 000
1.6.
An on-chip Programmable Counter/Timer Array (PCA) is included in addition to the four 16-bit general pur-
pose counter/timers. The PCA consists of a dedicated 16-bit counter/timer time base with three program-
mable capture/compare modules. The PCA clock is derived from one of six sources: the system clock
divided by 12, the system clock divided by 4, Timer 0 overflows, an External Clock Input (ECI), the system
clock, or the external oscillator clock source divided by 8. The external clock source selection is useful for
real-time clock functionality, where the PCA is clocked by an external source while the internal oscillator
drives the system clock.
Each capture/compare module can be configured to operate in one of six modes: Edge-Triggered Capture,
Software Timer, High Speed Output, 8- or 16-bit Pulse Width Modulator, or Frequency Output. Additionally,
Capture/Compare Module 2 offers watchdog timer (WDT) capabilities. Following a system reset, Module 2
is configured and enabled in WDT mode. The PCA Capture/Compare Module I/O and External Clock Input
may be routed to Port I/O via the Digital Crossbar.
Programmable Counter Array
Figure 1.13. PCA Block Diagram
Capture/Compare
Module 0
SYSCLK/12
SYSCLK/4
Timer 0 Overflow
SYSCLK
External Clock/8
ECI
Crossbar
Port I/O
Rev. 1.7
Capture/Compare
Module 1
CLOCK
MUX
PCA
C8051F330/1/2/3/4/5
16-Bit Counter/Timer
Capture/Compare
Module 2 / WDT
27

Related parts for C8051F334-GMR