HD64F2239FA16 Renesas Electronics America, HD64F2239FA16 Datasheet - Page 484

• Manufacturer Part Number: HD64F2239FA16
• Description: IC H8S MCU FLASH 384K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2239FA16

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 11 16-Bit Timer Pulse Unit (TPU)
Phase Counting Mode Application Example: Figure 11.30 shows an example in which phase
counting mode is designated for channel 1, and channel 1 is coupled with channel 0 to input servo
motor 2-phase encoder pulses in order to detect the position or speed.
Channel 1 is set to phase counting mode 1, and the encoder pulse A-phase and B-phase are input
to TCLKA and TCLKB.
Channel 0 operates with TCNT counter clearing by TGRC_0 compare match; TGRA_0 and
TGRC_0 are used for the compare match function, and are set with the speed control cycle and
position control cycle. TGRB_0 is used for input capture, with TGRB_0 and TGRD_0 operating
in buffer mode. The channel 1 counter input clock is designated as the TGRB_0 input capture
source, and detection of the pulse width of 2-phase encoder 4-multiplication pulses is performed.
TGRA_1 and TGRB_1 for channel 1 are designated for input capture, channel 0 TGRA_0 and
TGRC_0 compare matches are selected as the input capture source, and the up/down-counter
values for the control cycles are stored.
This procedure enables accurate position/speed detection to be achieved.
Rev. 6.00 Mar. 18, 2010 Page 422 of 982
REJ09B0054-0600
TCLKA
TCLKB
Figure 11.30 Phase Counting Mode Application Example
Edge
detection
circuit
TGRB_0 (pulse width capture)
TGRD_0 (buffer operation)
(position cycle capture)
(position control cycle)
(speed cycle capture)
(speed control cycle)
TGRA_1
TGRB_1
TGRA_0
TGRC_0
TCNT_1
TCNT_0
Channel 1
Channel 0
+
+
-
-