MC711K4CFNE3 Freescale Semiconductor, MC711K4CFNE3 Datasheet - Page 81

• Manufacturer Part Number: MC711K4CFNE3
• Description: IC MCU 8BIT 24K EPROM 84-PLCC
• Manufacturer: Freescale Semiconductor
• Series: HC11r

Specifications of MC711K4CFNE3

• Core Processor: HC11
• Core Size: 8-Bit
• Speed: 3MHz
• Connectivity: SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 62
• Program Memory Size: 24KB (24K x 8)
• Program Memory Type: OTP
• Eeprom Size: 640 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 84-PLCC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4.6 Memory Map
M68HC11K Family
MOTOROLA
MDA — Mode Select A Bit
After RESET is released, the mode select pins revert to their alternate
functions, described in
Reference, and Standby Power (MODA/LIR and
no longer influence the MCU operating mode.
The operating mode determines memory mapping and whether memory
is addressed on-chip or off-chip.
M68HC11K4 Family and M68HC11KS Family memory maps for each of
the four modes of operation. Memory locations for on-chip resources are
the same for both expanded and single-chip modes.
mode from special to normal, but not vice versa. To switch from a
special mode to a normal mode, write to the access-limited registers
(see
The mode select A bit reflects the status of the MODA input pin at the
rising edge of RESET. Software can change the MDA bit only while
the SMOD bit is set, effectively switching the operating mode between
special bootstrap and special test modes. Once the SMOD bit is clear,
the MODA bit is read-only and the operating mode cannot be changed
without going through a reset sequence.
Freescale Semiconductor, Inc.
For More Information On This Product,
0 = Normal mode operation in effect
1 = Special mode operation in effect
0 = Normal single-chip or special bootstrap mode in effect
1 = Normal expanded or special test mode in effect
Operating Modes and On-Chip Memory
Table
Go to: www.freescale.com
4-1) before clearing SMOD.
2.9 Mode Selection, Instruction Cycle
Figure 4-3
Operating Modes and On-Chip Memory
and
Figure 4-4
MODB/VSTBY), and
illustrate the
Technical Data
Memory Map
81