UPD78F9222MC-5A4-A Renesas Electronics America, UPD78F9222MC-5A4-A Datasheet - Page 147

no-image

UPD78F9222MC-5A4-A

Manufacturer Part Number
UPD78F9222MC-5A4-A
Description
MCU 8BIT 4KB FLASH 20PIN
Manufacturer
Renesas Electronics America
Series
78K0S/Kx1+r
Datasheet

Specifications of UPD78F9222MC-5A4-A

Core Processor
78K0S
Core Size
8-Bit
Speed
10MHz
Connectivity
LIN, UART/USART
Peripherals
LVD, POR, PWM, WDT
Number Of I /o
15
Program Memory Size
4KB (4K x 8)
Program Memory Type
FLASH
Ram Size
256 x 8
Voltage - Supply (vcc/vdd)
2 V ~ 5.5 V
Data Converters
A/D 4x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
*
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
UPD78F9222MC-5A4-A
Manufacturer:
FSC
Quantity:
340
Part Number:
UPD78F9222MC-5A4-A
Manufacturer:
NEC
Quantity:
20 000
frequency is f
If the setting value of the CMP01 register is N, the setting value of the CMP11 register is M, and the count clock
<4> When 8-bit timer counter H1 and the CMP11 register match, TOH1 output becomes inactive and the
<5> By performing procedures <3> and <4> repeatedly, a pulse with an arbitrary duty can be obtained.
<6> To stop the count operation, set TMHE1 = 0.
Cautions 1. In PWM output mode, the setting value for the CMP11 register can be changed during timer
compare register to be compared with 8-bit timer counter H1 is changed from the CMP11 register to the
CMP01 register.
generated.
CNT
2. Be sure to set the CMP11 register when starting the timer count operation (TMHE1 = 1) after
, the PWM pulse output cycle and duty are as follows.
PWM pulse output cycle = (N+1)/f
Duty = Active width : Total width of PWM = (M + 1) : (N + 1)
count operation. However, three operation clocks (signal selected using the CKS12 to
CKS10 bits of the TMHMD1 register) or more are required to transfer the register value after
rewriting the CMP11 register value.
the timer count operation was stopped (TMHE1 = 0) (be sure to set again even if setting the
same value to the CMP11 register).
At this time, 8-bit timer counter H1 is not cleared and the INTTMH1 signal is not
CHAPTER 8 8-BIT TIMER H1
User’s Manual U16898EJ6V0UD
CNT
145

Related parts for UPD78F9222MC-5A4-A