UPD78F0513AGB-GAF-AX Renesas Electronics America, UPD78F0513AGB-GAF-AX Datasheet - Page 573

• Manufacturer Part Number: UPD78F0513AGB-GAF-AX
• Description: MCU 8BIT 44-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx2r

Specifications of UPD78F0513AGB-GAF-AX

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 37
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0/Kx2
18.5.5 Stop condition
completed. When the device is used as a slave, stop conditions can be detected.
detected, bit 0 (SPD0) of IIC status register 0 (IICS0) is set to 1 and INTIIC0 is generated when bit 4 (SPIE0) of IICC0
register is set to 1.
R01UH0008EJ0401 Rev.4.01
Jul 15, 2010
When the SCL0 pin is at high level, changing the SDA0 pin from low level to high level generates a stop condition.
A stop condition is a signal that the master device generates to the slave device when serial transfer has been
A stop condition is generated when bit 0 (SPT0) of IIC control register 0 (IICC0) is set to 1. When the stop condition is
SDA0
SCL0
Figure 18-17. Stop Condition
H
CHAPTER 18 SERIAL INTERFACE IIC0
573