MAXQ7670ATL+T Maxim Integrated Products, MAXQ7670ATL+T Datasheet - Page 21

• Manufacturer Part Number: MAXQ7670ATL+T
• Description: IC MCU W/10BIT ADC 40TQFN-EP
• Manufacturer: Maxim Integrated Products
• Series: MAXQ™r

Specifications of MAXQ7670ATL+T

• Core Processor: RISC
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: CAN, SPI
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 7
• Program Memory Size: 64KB (32K x 16)
• Program Memory Type: FLASH
• Ram Size: 1K x 16
• Voltage - Supply (vcc/vdd): 2.25 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 40-TQFN Exposed Pad
• Processor Series: MAXQ7670
• Core: RISC
• Data Bus Width: 16 bit
• Data Ram Size: 2 KB
• Interface Type: SPI, JTAG, CAN
• Maximum Clock Frequency: 16 MHz
• Number Of Timers: 1
• Operating Supply Voltage: 4.5 V to 5.25 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

The DVDD reset supervisor resets the MAXQ7670 when
the +2.5V DVDD falls below the reset threshold. The
processor remains in reset until DVDD returns above
the reset threshold. The µC does not execute com-
mands in reset mode. See Figure 6 for the µC response
to DVDD brownout and reset.
Refer to the MAXQ7670 User’s Guide for detailed pro-
gramming information, and a more thorough descrip-
tion of POR and brownout behavior.
The integrated 3.3V 50mA linear regulator or an exter-
nal 3.3V supply powers AVDD. The integrated 3.3V reg-
ulator is inactive upon power-up. Enable the integrated
regulator with software programming after power-up.
When using an external supply, connect a regulated
3.3V supply to AVDD after applying DVDDIO.
Figure 6. DVDD Brownout and Reset Behavior
NOMINAL
DVDD (+2.5V)
+2.25V
DGND
DVLVL FLAG
(ASR[14])
DVBI FLAG
(ASR[4])
+2.38V
Internal 3.3V Linear Regulator
______________________________________________________________________________________
PGA, 64KB Flash, and CAN Interface
BROWNOUT
INTERRUPT
(BOI)
Microcontroller with 10-Bit ADC,
INTERNAL RESET
BROWNOUT
RESET OUTPUT
RESET
(BOR)
The integrated 2.5V 50mA linear regulator or an exter-
nal 2.5V supply applied at DVDD powers DVDD.
Connect REGEN2 to GNDIO to enable the integrated
regulator. Connect REGEN2 to DVDDIO to use an
external supply. When using an external supply, con-
nect a regulated 2.5V supply to DVDD after applying
DVDDIO.
Both internal linear regulators are capable of supplying
up to 50mA each. When using the regulators to power
AVDD and DVDD and to provide power to external
devices, make sure DVDDIO’s power input can source
a current greater than the sum of the MAXQ7670 sup-
ply current and the load currents of the two regulators.
FLAG ARBITRARILY
CLEARED BY µC
BOR STATE
DVDDIO Current Requirements
Internal 2.5V Linear Regulator
VDBE BIT SET BY µC
THRESHOLD RANGE
DVDD BROWNOUT
INTERRUPT
21