PIC16F716-I/ML Microchip Technology, PIC16F716-I/ML Datasheet - Page 59

• Manufacturer Part Number: PIC16F716-I/ML
• Description: IC PIC MCU FLASH 2KX14 28QFN
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F716-I/ML

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 13
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -

REGISTER 8-2:
© 2007 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4
bit 3-2
bit 1-0
ECCPASE
Note 1: The auto-shutdown condition is a level-
R/W-0
2: Writing to the ECCPASE bit is disabled
3: Once the auto-shutdown condition has
based signal, not an edge-based signal.
As long as the level is present, the auto-
shutdown will persist.
while
persists.
been removed and the PWM restarted
(either through firmware or auto-restart),
the PWM signal will always restart at the
beginning of the next PWM period.
ECCPASE: ECCP Auto-Shutdown Event Status bit
1 = A shutdown event has occurred; ECCP outputs are in shutdown state
0 = ECCP outputs are operating
ECCPAS2: ECCP Auto-Shutdown bit 2
1 = RB0 (INT) pin low level (‘0’) causes shutdown
0 =
Unimplemented: Read as ‘0’
ECCPAS0: ECCP Auto-Shutdown bit ‘0’
1 = RB4 pin low level (‘0’) causes shutdown
0 = RB4 pin has no effect on ECCP
PSSACn: Pins P1A and P1C Shutdown State Control bits
00 = Drive pins P1A and P1C to ‘0’
01 = Drive pins P1A and P1C to ‘1’
1x = Pins P1A and P1C tri-state
PSSBDn: Pins P1B and P1D Shutdown State Control bits
00 = Drive pins P1B and P1D to ‘0’
01 = Drive pins P1B and P1D to ‘1’
1x = Pins P1B and P1D tri-state
ECCPAS2
R/W-0
an
ECCPAS: ENHANCED CAPTURE/COMPARE/PWM AUTO-SHUTDOWN
CONTROL REGISTER
RB0 (INT) pin has no effect on ECCP
auto-shutdown
W = Writable bit
‘1’ = Bit is set
U-0
—
condition
ECCPAS0
R/W-0
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
PSSAC1
R/W-0
PSSAC0
R/W-0
x = Bit is unknown
PIC16F716
PSSBD1
R/W-0
DS41206B-page 57
PSSBD0
R/W-0
bit 0