Z86D7308PSC1987 Zilog, Z86D7308PSC1987 Datasheet - Page 45

• Manufacturer Part Number: Z86D7308PSC1987
• Description: IC 32K OTP 3 VOLT 40-DIP
• Manufacturer: Zilog
• Series: Z8® IRr

Specifications of Z86D7308PSC1987

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 8MHz
• Peripherals: Brown-out Detect/Reset, LVD, POR, WDT
• Number Of I /o: 31
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: OTP
• Ram Size: 236 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 40-DIP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -
• Connectivity: -

PS019401-1102
Field
T16_Enable
Single/Modulo-N
Time_Out
Note:
ensures that when the clock is enabled, a transition occurs to the initial state set
by CTR1, D1.
In Demodulation Mode, this bit is set to 1 when a rising edge is detected in the
input signal. In order to reset the mode, a 1 should be written to this location.
Initial_T16 Out/Falling _Edge
In Transmit Mode, if it is 0, the output of T16 is set to 0 when it starts to count. If it
is 1, the output of T16 is set to 1 when it starts to count. This bit is effective only in
Normal or Ping-Pong Mode (CTR1, D3; D2). When the counter is not enabled and
this bit is set, T16_OUT is set to the opposite state of this bit. This ensures that
when the clock is enabled, a transition occurs to the initial state set by CTR1, D0.
In Demodulation Mode, this bit is set to 1 when a falling edge is detected in the
input signal. In order to reset it, a 1 should be written to this location.
CTR2 Counter/Timer 16 Control Register
Table 13 lists and briefly describes the fields for this register.
Table 13. CTR2 (D)02h: Counter/Timer16 Control Register
Modifying CTR1 (D1 or D0) while the counters are enabled
causes unpredictable output from T8/16_OUT.
Bit Position
7-------
-6------
--5-----
P
R
E
L
I
R
W
R/W
R
W
M
I
N
A
40/44/48-Pin Low-Voltage IR OTP
Value
0*
1
0
1
0
1
0
1
0
1
0
1
R
Y
Description
Counter Disabled
Counter Enabled
Stop Counter
Enable Counter
Transmit Mode
Modulo-N
Single Pass
Demodulation Mode
T16 Recognizes Edge
T16 Does Not
Recognize Edge
No Counter Timeout
Counter Timeout
Occurred
No Effect
Reset Flag to 0
Z86D73
39