MC68HC908MR8CFA Freescale Semiconductor, MC68HC908MR8CFA Datasheet - Page 197

• Manufacturer Part Number: MC68HC908MR8CFA
• Description: IC MCU 8K FLASH 8MHZ PWM 32-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908MR8CFA

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 16
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

MC68HC908MR8 — Rev 4.1
Freescale Semiconductor
NOTE:
Upon power-on reset, if the received bytes of the security code do not
match the data at locations $FFF6–$FFFD, the host fails to satisfy the
security feature. The MCU remains in monitor mode, but reading a ROM
location returns an invalid value and trying to execute code from ROM
causes an illegal address reset. After receiving the eight security bytes
from the host, the MCU transmits a break character, signifying that it is
ready to receive a command.
The MCU does not transmit a break character until after the host sends
the eight security bytes.
To determine whether the security code entered is correct, check to see
if bit 6 of RAM address $60 is set. If it is, then the correct security code
has been entered and ROM can be accessed.
If the security sequence fails, the device can be reset (via power-pin
reset only) and brought up in monitor mode to attempt another entry.
After failing the security sequence, the FLASH memory can also be bulk
erased by executing an erase routine that was downloaded into internal
RAM. The bulk erase operation clears the security code locations so that
all eight security bytes become $FF.
Monitor ROM (MON)
Monitor ROM (MON)
Technical Data
Security
197