M306N5FCTFP Renesas Electronics America, M306N5FCTFP Datasheet - Page 15

• Manufacturer Part Number: M306N5FCTFP
• Description: IC M16C MCU FLASH 100QFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/6Nr

Specifications of M306N5FCTFP

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, I²C, IEBus, SIO, UART/USART
• Peripherals: DMA, WDT
• Number Of I /o: 87
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 5K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 26x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

M16C/6N Group (M16C/6N5)
Rev.2.40
REJ03B0004-0240
Under development
This document is under development and its contents are subject to change.
2.3 Frame Base Register (FB)
2.4 Interrupt Table Register (INTB)
2.5 Program Counter (PC)
2.6 User Stack Pointer (USP), Interrupt Stack Pointer (ISP)
2.7 Static Base Register (SB)
2.8 Flag Register (FLG)
FB is configured with 16 bits, and is used for FB relative addressing.
INTB is configured with 20 bits, indicating the start address of an interrupt vector table.
PC is configured with 20 bits, indicating the address of an instruction to be executed.
Stack pointer (SP) comes in two types: USP and ISP, each configured with 16 bits.
Your desired type of stack pointer (USP or ISP) can be selected by the U flag of FLG.
SB is configured with 16 bits, and is used for SB relative addressing.
FLG consists of 11 bits, indicating the CPU status.
2.8.1 Carry Flag (C Flag)
2.8.2 Debug Flag (D Flag)
2.8.3 Zero Flag (Z Flag)
2.8.4 Sign Flag (S Flag)
2.8.5 Register Bank Select Flag (B Flag)
2.8.6 Overflow Flag (O Flag)
2.8.7 Interrupt Enable Flag (I Flag)
2.8.8 Stack Pointer Select Flag (U Flag)
2.8.9 Processor Interrupt Priority Level (IPL)
2.8.10 Reserved Area
This flag retains a carry, borrow, or shift-out bit that has occurred in the arithmetic/logic unit.
This flag is used exclusively for debugging purpose. During normal use, set to 0.
This flag is set to 1 when an arithmetic operation resulted in 0; otherwise, it is 0.
This flag is set to 1 when an arithmetic operation resulted in a negative value; otherwise, it is 0.
Register bank 0 is selected when this flag is 0; register bank 1 is selected when this flag is 1.
This flag is set to 1 when the operation resulted in an overflow; otherwise, it is 0.
This flag enables a maskable interrupt.
Maskable interrupts are disabled when the I flag is 0, and are enabled when the I flag is 1. The I flag is set
to 0 when the interrupt request is accepted.
ISP is selected when the U flag is 0; USP is selected when the U flag is 1.
The U flag is set to 0 when a hardware interrupt request is accepted or an INT instruction for software
interrupt Nos. 0 to 31 is executed.
IPL is configured with three bits, for specification of up to eight processor interrupt priority levels from level
0 to level 7.
If a requested interrupt has priority greater than IPL, the interrupt request is enabled.
When white to this bit, write 0. When read, its content is undefined.
Aug 25, 2006
page 13 of 84
2. Central Processing Unit (CPU)