TL072IN STMicroelectronics, TL072IN Datasheet - Page 15

• Manufacturer Part Number: TL072IN
• Description: IC OP AMP JFET DUAL LNOISE 8-DIP
• Manufacturer: STMicroelectronics

Specifications of TL072IN

• Amplifier Type: J-FET
• Number Of Circuits: 2
• Slew Rate: 16 V/µs
• Gain Bandwidth Product: 4MHz
• Current - Input Bias: 20pA
• Voltage - Input Offset: 3000µV
• Current - Supply: 1.4mA
• Current - Output / Channel: 40mA
• Voltage - Supply, Single/dual (±): 6 V ~ 36 V, ±3 V ~ 18 V
• Operating Temperature: -40°C ~ 105°C
• Mounting Type: Through Hole
• Package / Case: 8-DIP (0.300", 7.62mm)
• Number Of Channels: 2
• Common Mode Rejection Ratio (min): 80 dB
• Input Offset Voltage: 10 mV
• Input Bias Current (max): 200 pA
• Supply Current: 2.5 mA
• Maximum Power Dissipation: 680 mW
• Maximum Operating Temperature: + 105 C
• Minimum Operating Temperature: - 40 C
• Dual Supply Voltage: +/- 5 V, +/- 9 V, +/- 12 V, +/- 15 V
• Maximum Dual Supply Voltage: +/- 18 V
• Minimum Dual Supply Voltage: +/- 3 V
• Mounting Style: Through Hole
• Shutdown: No
• Technology: BiFET
• Voltage Gain Db: 106.02 dB
• Bandwidth: 4 MHz
• Channel Separation: 120
• Common Mode Rejection Ratio: 86
• Current, Input Bias: 20 pA
• Current, Input Offset: 5 pA
• Current, Output: 20 mA
• Current, Supply: 1.4 mA
• Harmonic Distortion: 0.01 %
• Number Of Amplifiers: Dual
• Package Type: DIP-8
• Resistance, Input: 10^12 Ohms
• Signal Gain: 200 V/mV
• Temperature, Operating, Range: -40 to +105 °C
• Time, Rise: 0.1 μs
• Voltage, Input: ±15 V
• Voltage, Noise: 15 nV/sqrt Hz
• Voltage, Offset: 3 mV
• Voltage, Supply: 6 to 36 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Output Type: -
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-7659-5; TL072IN

TL072 TL072A TL072B
8
Revision history
Table 7.
04-Dec-2006
28-Mar-2001
06-Mar-2007
13-Mar-2008
02-Apr-2004
15-Jul-2008
Date
Document revision history
Revision
1
2
3
4
5
6
Initial release.
Correction to pin connection diagram on cover page. Unpublished.
Modified graphics in package mechanical data.
Expanded order codes table and added automotive grade order
codes. See
Added thermal resistance and ESD tolerance in
Added
Updated package mechanical data to make it compliant with the
latest JEDEC standards.
ESD HBM value modified in AMR table.
Re-ordered order codes table.
Removed TL072BIY and TL072AIY order codes from order code
table.
Corrected footnote for automotive grade order codes in order codes
table.
Removed information concerning military temperature range
(TL072Mx, TL072AMx, TL072BMx).
Added order codes for automotive grade products in
Table 6: Order
Table 2: Operating conditions on page
Table 6 on page
codes.
14.
Changes
3.
Table 1 on page
Revision history
15/16
3.