TSH84IPT STMicroelectronics, TSH84IPT Datasheet - Page 17

• Manufacturer Part Number: TSH84IPT
• Description: IC OPAMP R-R WIDE 14TSSOP
• Manufacturer: STMicroelectronics

Specifications of TSH84IPT

• Amplifier Type: General Purpose
• Number Of Circuits: 4
• Output Type: Rail-to-Rail
• Slew Rate: 118 V/µs
• Gain Bandwidth Product: 65MHz
• -3db Bandwidth: 100MHz
• Current - Input Bias: 6µA
• Voltage - Input Offset: 800µV
• Current - Supply: 9.8mA
• Current - Output / Channel: 55mA
• Voltage - Supply, Single/dual (±): 4.5 V ~ 12 V, ±2.25 V ~ 6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 14-TSSOP
• Number Of Channels: 4
• Voltage Gain Db: 84 dB
• Common Mode Rejection Ratio (min): 72 dB
• Input Offset Voltage: 10 mV
• Operating Supply Voltage: 5 V, 9 V
• Supply Current: 42 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Maximum Dual Supply Voltage: +/- 6 V
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-8926-2

TSH80, TSH81, TSH82, TSH84
3.2
Video capabilities
To characterize the differential phase and differential gain a CCIR330 video line is used.
The video line contains five (flat) levels of luminance onto which the chrominance signal is
superimposed. The luminance gives various amplitudes which define the saturation of the
signal. The chrominance gives various phases which define the color of the signal.
Differential phase (or differential gain) distortion is present if a signal chrominance phase
(gain) is affected by the luminance level. The differential phase and gain represent the ability
to uniformly process the high frequency information at all luminance levels.
When a differential gain is present, color saturation is not correctly reproduced.
The input generator is the Rhode & Schwarz CCVS. The output measurement is done by
the Rhode and Schwarz VSA.
Figure 32. Measurement on Rhode and Schwarz VSA
Doc ID 9413 Rev 5
Test conditions
17/27