LMC6061AIM/NOPB National Semiconductor, LMC6061AIM/NOPB Datasheet - Page 4

• Manufacturer Part Number: LMC6061AIM/NOPB
• Description: IC OP AMP CMOS SINGL MICRO 8SOIC
• Manufacturer: National Semiconductor

Specifications of LMC6061AIM/NOPB

• Amplifier Type: General Purpose
• Number Of Circuits: 1
• Output Type: Rail-to-Rail
• Slew Rate: 0.35 V/µs
• Gain Bandwidth Product: 100kHz
• Current - Input Bias: 0.01pA
• Voltage - Input Offset: 100µV
• Current - Supply: 24µA
• Current - Output / Channel: 26mA
• Voltage - Supply, Single/dual (±): 4.5 V ~ 15.5 V, ±2.25 V ~ 7.75 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Bandwidth: 100 kHz
• Common Mode Rejection Ratio: 85
• Current, Input Bias: 0.01 pA
• Current, Input Offset: 0.005 pA
• Current, Output: 22 mA
• Current, Supply: 20 μA
• Harmonic Distortion: 0.01 %
• Impedance, Thermal: 193 °C/W
• Number Of Amplifiers: Single
• Package Type: SO-8
• Resistance, Input: 10 Teraohms
• Temperature, Operating, Range: -40 to +85 °C
• Voltage, Gain: 4000 V/mV
• Voltage, Input: 4.5 to 15.5 V
• Voltage, Noise: 83 nV/sqrt Hz
• Voltage, Offset: 100 μV
• Voltage, Output, High: 4.995 V
• Voltage, Output, Low: 0.005 V
• Voltage, Supply: 5 V
• Number Of Channels: 1
• Voltage Gain Db: 132.04 dB
• Common Mode Rejection Ratio (min): 75 dB
• Input Voltage Range (max): 15.5 V
• Input Voltage Range (min): 4.5 V
• Input Offset Voltage: 0.35 mV at 5 V
• Operating Supply Voltage: 5 V, 9 V, 12 V, 15 V
• Supply Current: 0.024 mA at 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device
• Other names: *LMC6061AIM; *LMC6061AIM/NOPB; LMC6061AIM

www.national.com
AC Electrical Characteristics
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The
guaranteed specifications apply only for the test conditions listed.
Note 2: Applies to both single-supply and split-supply operation. Continous short circuit operation at elevated ambient temperature can result in exceeding the
maximum allowed junction temperature of 150˚C. Output currents in excess of
Note 3: The maximum power dissipation is a function of T
− T
Note 4: Human body model, 1.5 k
Note 5: Typical values represent the most likely parametric norm.
Note 6: All limits are guaranteed by testing or statistical analysis.
Note 7: V
Note 8: V
Note 9: For operating at elevated temperatures the device must be derated based on the thermal resistance
Note 10: Do not connect output to V
Note 11: All numbers apply for packages soldered directly into a PC board.
Note 12: For guaranteed Military Temperature Range parameters see RETSMC6061X.
A
)/
JA
.
+
+
= 15V, V
= 15V. Connected as Voltage Follower with 10V step input. Number specified is the slower of the positive and negative slew rates.
CM
= 7.5V and R
in series with 100 pF.
+
, when V
L
connected to 7.5V. For Sourcing tests, 7.5V
+
is greater than 13V or reliability witll be adversely affected.
J(Max)
,
(Continued)
JA
, and T
A
. The maximum allowable power dissipation at any ambient temperature is P
±
4
30 mA over long term may adversely affect reliability.
V
O
11.5V. For Sinking tests, 2.5V
JA
with P
D
= (T
V
O
J
–T
7.5V.
A
)/
JA
.
D
= (T
J(Max)