L4949EP STMicroelectronics, L4949EP Datasheet - Page 12

• Manufacturer Part Number: L4949EP
• Description: IC VREG VLDO MULTIFUNCT SO-SO2
• Manufacturer: STMicroelectronics

Specifications of L4949EP

• Regulator Topology: Positive Fixed
• Voltage - Output: 5V
• Voltage - Input: Up to 28V
• Voltage - Dropout (typical): 0.3V @ 100mA
• Number Of Regulators: 1
• Current - Output: 100mA
• Current - Limit (min): 120mA
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 20-SOIC (7.5mm Width)
• Number Of Outputs: 1
• Polarity: Positive
• Input Voltage Max: 28 V
• Output Voltage: 5 V
• Output Type: Fixed
• Dropout Voltage (max): 0.5 V
• Output Current: 100 mA
• Line Regulation: 20 mV
• Load Regulation: 30 mV
• Voltage Regulation Accuracy: 1 %
• Maximum Operating Temperature: + 150 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Reference Voltage: 1.23 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Application information
3.4
12/19
Figure 5.
Figure 6.
Preregulator
To improve the transient immunity a preregulator stabilizes the internal supply voltage to 5 V.
This internal voltage is present at Pin 3 (V
because the output capability is very small (≤ 10 µA).
This output may be used as an option when a better transient behaviour for supply voltages
less than 8 V is required (see also application note).
In this case a capacitor (100 nF - 1 µF) must be connected between pin V
feature is not used pin V
Output voltage vs input voltage
Quiescent current vs supply voltage
Z
must be left open.
Doc ID 4275 Rev 6
Z
). This voltage should not be used as an output
Z
and GND. If this
L4949E