RR0816P-164-D Susumu, RR0816P-164-D Datasheet - Page 3

• Manufacturer Part Number: RR0816P-164-D
• Description: RES 160K OHM 1/16W .5% 0603 SMD
• Manufacturer: Susumu
• Series: RRr

Specifications of RR0816P-164-D

• Resistance (ohms): 160K
• Power (watts): 0.063W, 1/16W
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Tolerance: ±0.5%
• Size / Dimension: 0.063" L x 0.031" W (1.60mm x 0.80mm)
• Height: 0.016" (0.40mm)
• Lead Style: Surface Mount (SMD - SMT)
• Package / Case: 0603 (1608 Metric)
• Resistance In Ohms: 160K
• Case: 0603 (1608 metric)
• Resistance: 160 KOhms
• Power Rating: 0.0625 Watt (1/16 Watt)
• Voltage Rating: 75 Volts
• Operating Temperature Range: - 55 C to + 125 C
• Termination Style: SMD/SMT
• Dimensions: 0.8 mm W x 1.6 mm L x 0.4 mm H
• Product: Thin Film Resistors SMD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Details
• Other names: RR0816P164D; RR08P160KDTR

TITLE:
5. Marking
5.1 Marking in E24 series
(Example)
5.2 Marking in E96 series
4.2 Rated dissipation at 70deg C
4.3 Rated voltage
A rated resistance shall be marked on the protect coating with three digit of number.
See para.2. (3)
A manufacturing date code or three digit of number shall be marked on the protect coating.
4.4 Limiting element voltage
4.5 Maximum overload voltage
4.6 Operating temperature range
4.7 Storage temperature range
(1) A manufacturing date code
(2) Three digit of number
Rated dissipation is based on continuous full load operation at rated ambient temperature of 70deg C.
For resistors operated at ambient temperature in excess of 70deg C, the maximum load shall be derated
in accordance with the following curve.
The d.c. or a.c. r.m.s voltage shall be calculated from the following expression.
When the rated voltage exceeds the limiting element voltage, the limiting element voltage shall be the
rated voltage.
０.０６３Ｗ
E=√R×P
（Example）4.99KΩ＝499×10
Percentage of the
rated dissipation
Chip resistor RR0816 series
Refer to JIS C 5201-1 Annex 1 Table5
See next table.
Three digit of number shall be marked on the protect coating. In this case, the three digit of
code number shall be added at the end of type designation
Specification for
3.9kΩ→39 00→ ３９２
[ JIS Code 1J ]
%
100
Where E : Rated voltage
50
0
-55
Ambient temperature
P : Rated dissipation
R : Rated resistance
Area of
Recommended
operation
１
Type designation： RR0816P-4991-B-T5-68H
Marking ６８Ｈ
SUSUMU
CO.,LTD
-55 to +125 deg C
-55 to +125 deg C
150 Ｖ
70
75 Ｖ
（Ω）
（Ｖ）
（Ｗ）
SPEC.NO:
125
RR00-1098
Fig.3 Derating curve
deg C
Rev. No.
0
3/16