RR0816P-164-D Susumu, RR0816P-164-D Datasheet - Page 6

• Manufacturer Part Number: RR0816P-164-D
• Description: RES 160K OHM 1/16W .5% 0603 SMD
• Manufacturer: Susumu
• Series: RRr

Specifications of RR0816P-164-D

• Resistance (ohms): 160K
• Power (watts): 0.063W, 1/16W
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Tolerance: ±0.5%
• Size / Dimension: 0.063" L x 0.031" W (1.60mm x 0.80mm)
• Height: 0.016" (0.40mm)
• Lead Style: Surface Mount (SMD - SMT)
• Package / Case: 0603 (1608 Metric)
• Resistance In Ohms: 160K
• Case: 0603 (1608 metric)
• Resistance: 160 KOhms
• Power Rating: 0.0625 Watt (1/16 Watt)
• Voltage Rating: 75 Volts
• Operating Temperature Range: - 55 C to + 125 C
• Termination Style: SMD/SMT
• Dimensions: 0.8 mm W x 1.6 mm L x 0.4 mm H
• Product: Thin Film Resistors SMD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Details
• Other names: RR0816P164D; RR08P160KDTR

TITLE:
6.1.5 Voltage proof
6.2 Mechanical
Support
6.2.1 Substrate bending test ( Bond strength of the face plating )
(
Method;
Specification;
φ
The resistor shall be tested as shown in paragraph 6.1.4.
The test voltage shall be a voltage of 100V (a.c. r.m.s.) between both electrode.
The voltage is gradually increased at a rate of about 100 V/s. from almost 0 V to the specified voltage
and maintained as it is for 60s. +10/0s., then gradually decreased to almost 0 V.
For other procedures, refer to IEC 60115-1, Sub-clause 4.7.
Change in resistance
Without damage by flash over (spark, arcing), burning or breakdown etc.
For other procedures, refer to IEC 60115-1, Sub-clause 4.33.
Method;
Specification;
5)
Apply pressure in the direction of the arrow at a rate of about 0.5 mm/s. until bent width reaches 3 mm
and hold for 30 s.
Change in resistance
Without mechanical damage such as breaks.
Chip resistor RR0816 series
Solder
45
Mounted state
Specification for
Testing printed circuit board
±
2mm or less
（Unit：㎜）
Specimen
45
:
:
±(0.5%+0.05Ω)
±(0.5%+0.05Ω)
SUSUMU
CO.,LTD
Pressurizing jig
R230
SPEC.NO:
Resistance meter
Test state
20
RR00-1098
50
Loading
Rev. No.
0
6/16