EA-XPR-002 Embedded Artists, EA-XPR-002 Datasheet - Page 26

no-image

EA-XPR-002

Manufacturer Part Number
EA-XPR-002
Description
BOARD LPCXPRESSO LPC1114
Manufacturer
Embedded Artists
Series
LPCXpressor
Type
MCUr
Datasheets

Specifications of EA-XPR-002

Contents
Board, Software
For Use With/related Products
EA-XPR-021, ARM Cortex-M0
For Use With
EA-XPR-021 - BOARD BASE LPCXPRESSO
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
EA-XPR-002
Manufacturer:
Embedded Artists
Quantity:
135
NXP Semiconductors
LPC1111_12_13_14
Product data sheet
Fig 6.
watchdog oscillator
system oscillator
IRC oscillator
IRC oscillator
LPC1111/12/13/14 clock generation block diagram
(system PLL clock select)
7.15.1.1 Internal RC oscillator
7.15.1 Crystal oscillators
SYSPLLCLKSEL
7.15 Clocking and power control
The LPC1111/12/13/14 include three independent oscillators. These are the system
oscillator, the Internal RC oscillator (IRC), and the Watchdog oscillator. Each oscillator can
be used for more than one purpose as required in a particular application.
Following reset, the LPC1111/12/13/14 will operate from the Internal RC oscillator until
switched by software. This allows systems to operate without any external crystal and the
bootloader code to operate at a known frequency.
See
The IRC may be used as the clock source for the WDT, and/or as the clock that drives the
PLL and subsequently the CPU. The nominal IRC frequency is 12 MHz. The IRC is
trimmed to 1 % accuracy over the entire voltage and temperature range.
Figure 6
SYSTEM PLL
(main clock select)
MAINCLKSEL
for an overview of the LPC1111/12/13/14 clock generation.
All information provided in this document is subject to legal disclaimers.
main clock
Rev. 4 — 10 February 2011
watchdog oscillator
watchdog oscillator
system oscillator
SYSTEM CLOCK
IRC oscillator
IRC oscillator
DIVIDER
(WDT clock update enable)
(CLKOUT update enable)
CLKOUTUEN
WDTUEN
system clock
32-bit ARM Cortex-M0 microcontroller
LPC1111/12/13/14
SYSAHBCLKCTRL[1:18]
(AHB clock enable)
CLKOUT PIN CLOCK
UART PERIPHERAL
SPI0 PERIPHERAL
SPI1 PERIPHERAL
CLOCK DIVIDER
CLOCK DIVIDER
CLOCK DIVIDER
18
WDT CLOCK
DIVIDER
DIVIDER
© NXP B.V. 2011. All rights reserved.
AHB clocks 1 to 18
(memories
and peripherals)
AHB clock 0
(system)
SPI0
UART
SPI1
WDT
CLKOUT pin
002aae514
26 of 66

Related parts for EA-XPR-002