20-101-1207 Rabbit Semiconductor, 20-101-1207 Datasheet - Page 45

• Manufacturer Part Number: 20-101-1207
• Description: RCM4510W FCC CERTIFIED
• Manufacturer: Rabbit Semiconductor
• Type: Transceiver, 802.15.4/ZigBeer

Specifications of 20-101-1207

• Frequency: 2.4GHz
• Wireless Frequency: 29.49 MHz
• For Use With/related Products: RCM4510W
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1144

4.4 Auxiliary I/O
4.4.1 Digital I/O
The RCM4510W modules’ XBee RF module has up to five general-purpose I/O on header
J4 — GPIO0, GPIO8, GPIO13, GPIO15, and GPIO16. Table 4 provides the names used in
Dynamic C for these pins and their default configurations.
All the pins have the following software-configurable features.
• Selectable as input or output.
• Output is either sinking or sourcing, and may be set up for a default high or low.
• Can be pulled up internally.
The four digital I/O, DIO0–DIO3, are similar to the general-purpose I/O, but may instead
by configured in software as analog inputs.
The input switching threshold between logic 0 and logic 1 is 0.66–2.64 V DC, and the out-
put switching threshold between logic 0 and logic 1 is 0.59–2.71 V DC.
User’s Manual
J4 Pin
10
11
13
14
6
NOTE: The XBee firmware associated with Dynamic C v. 10.46 does not support I/O
reads for RCM4510W RabbitCore modules set up as API coordinators or as API routers.
Schematic Name
Table 4. XBee RF Module GPIO Pin Setup
GPIO13
GPIO15
GPIO16
GPIO0
GPIO8
Dynamic C Name
DIO_05
DIO_12
DIO_04
DIO_10
DIO_11
Default Configuration
Digital Input (pulled up)
Digital Input (pulled up)
Digital Output (high)
Digital Output (high)
Digital Output (high)
39