ETRX3DVKA357 Telegesis Ltd, ETRX3DVKA357 Datasheet - Page 22

• Manufacturer Part Number: ETRX3DVKA357
• Description: KIT DEVELOPMENT FOR ETRX357
• Manufacturer: Telegesis Ltd
• Type: ZigBit™r

Specifications of ETRX3DVKA357

• Frequency: 2.4GHz
• Kit Contents: 3x ETRX35xDV Development Boards, 3x USB Cables, 2x ETRX35x On Carrier Boards, 2x ETRX35xHR Boards
• Mcu Supported Families: ETRX3
• Silicon Manufacturer: Telegesis
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: ETRX357
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 920-1009; ETRX2DVK357

11.5 Temperature display
Telegesis Terminal includes a demonstration of how data can be collected from remote nodes and
displayed on a central “sink” node. To activate the graph function:
It is usually easiest to set the sensor device’s registers by accessing them via USB, but you can
also use the ATREMS command from the sink node.
Telegesis Terminal was written for the ETRX2; the ETRX357’s ADCs are ten times more sensitive
so its temperature readings will appear strange.
©2010 Telegesis (UK) Ltd
1. Define the module on the data-gathering development board as the network sink with the
2. Instruct one or more Carrier Boards to send their ADC readings at regular intervals by
3. Activate the temperature sensor ADC on each Carrier Board with the command
4. Turn on the sensor power on each Carrier Board with the command
5. Activate the graph by selecting Tools -> R2xx Temperature Awareness
command
ATS104=1
setting a Timer/Counter on the CB, eg to send every second using Timer/Counter 5 set:
S33=0004
S34=8110
ATS15D=1
ATS182=1
Figure 22. Temperature readings from remote sensors
- 22 -
ETRX35xDVK Product Manual (Rev 1.01)
ETRX35x Development Kit