AT86RF211SDK E2V, AT86RF211SDK Datasheet - Page 5

• Manufacturer Part Number: AT86RF211SDK
• Description: KIT DEV FOR AT86RF211/915MHZ
• Manufacturer: E2V
• Series: Smart RFr
• Type: Transceiverr

Specifications of AT86RF211SDK

• Frequency: 915MHz
• For Use With/related Products: AT86RF211 @ 915MHz
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: AT86RF211-DK; AT86RF211-DK915107; AT86RF211DK; AT86RF211DK915107; AT86RF211DK915107

1.5
5348B–WIRE–03/06
Synchronous Receive Modes
Figure 1-2.
Using a UART controller is a good solution in this case. NRZ or Manchester coding is
possible, but is to be held by the MCU itself.
In addition to the modes described above, the AT86RF211S provides a clock signal that
facilitates recovery of data by any low-cost MCU (no UART controller, for instance).
The data can also be synchronized on this clock signal—the benefits of this are:
Companion Microcontroller
• Bit decision is done on-chip
• Jitter is removed
• Processing time constraints on the MCU are eliminated
Asynchronous Transparent Receive Mode
SLE, SCK, SDATA
(for set-up)
DATAMSG
3
DATAMSG
AT86RF211S also acts like a "pipe":
data (collected by the antenna)
is available on pin DATAMSG
AT86RF211S
F = Frequency of
Received Signal
AT86RF211S
Receive Mode
5