ADNK-3043-TI27 Avago Technologies US Inc., ADNK-3043-TI27 Datasheet - Page 6

• Manufacturer Part Number: ADNK-3043-TI27
• Description: WIRELESS MOUSE DESIGN KIT
• Manufacturer: Avago Technologies US Inc.
• Type: Wireless Mouse Development Kitr

Specifications of ADNK-3043-TI27

• Frequency: 2.4GHz
• Description/function: Optical Mouse Sensor Kit
• Interface Type: USB
• Product: Display Modules
• Touch Panel: No Touch Panel
• For Use With/related Products: ADNS-3043
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Regulatory Requirements
• Passes FCC B and worldwide analogous emission
• Passes EN61000-4-4/IEC801-4 EFT tests when assem-
• UL flammability level UL94 V-0.
• Provides sufficient ESD creepage/clearance distance
• For eye safety consideration, please refer to the docu-
6
limits when assembled into a mouse with unshielded
cable and following Avago recommendations.
bled into a mouse with unshielded cable and follow-
ing Avago recommendations.
to avoid discharge up to 15kV when assembled into a
mouse according to usage instructions above.
ment, Eye Safety Calculation AN1228 available on the
web site,
http://www.avagotech.com/view/opticalnavigation.
Below is the summary of the components contained in the
ADNK-3034-TI27 Designer’s Kit.
Sensor
The sensor technical information is contained in the ADNS-
3040 Data Sheet.
Other system components
Technical information on the TI MSP430F1222 microcon-
troller is contained in the TI Data Sheet. Please contact
your local TI office for theMSP430 development tools.
These tools will allow the designer to make changes and
recompile the source code; perform In-Circuit Emulation
and debug new code for added features.
Programming support and programmer adaptors for the
MSP430 can be found through TI or through other 3
programming tool companies. For further information on
this product, please contact Texas Instrument.
Cypress Semiconductor provides extensive development
tools for the xxxxx USB controller used in the receiver
dongle.
Lens
The lens technical information is contained in the ADNS-
3120-001 Data Sheet. The flange on the standard ADNS-
3120-001 lens is for ESD protection.
LED Assembly Clip
The information on the assembly clip is contained in the
ADNS-2220-001 Data Sheet.
LED
The LED technical information is contained in the HLMP-
ED80-XX000 Data Sheet and Application Note AN-1228.
Additional application notes regarding Eye Safety Require-
ments are also available at Avago’s website.
Base Plate Feature – IGES File
The IGES file on the CD-ROM provides recommended base
plate molding features to ensure optical alignment. This
includes a typical PCB assembly diagrams recommended
solder fixture in assembly and exploded view, as well as
solder plate. See Appendix C for details.
Reference Design Documentation – Gerber File
The Gerber File presents detailed schematics used in
ADNK-3043-TI27 in PCB layout form. The file for this
reference design can be found in the Hardware Support
files folder in the CD-Rom.
Overall circuit
A schematic of the overall circuit is shown in Appendix A of
this document. Appendix B lists the bill of materials.
rd
party