AD8345AREZ Analog Devices Inc, AD8345AREZ Datasheet - Page 5

• Manufacturer Part Number: AD8345AREZ
• Description: IC QUADRATURE MOD 250MHZ 16TSSOP
• Manufacturer: Analog Devices Inc

Specifications of AD8345AREZ

• Function: Modulator
• Lo Frequency: 250MHz ~ 1GHz
• Rf Frequency: 140MHz ~ 1GHz
• P1db: 2.5dBm
• Noise Floor: -155dBm/Hz
• Output Power: 2dBm
• Current - Supply: 78mA
• Voltage - Supply: 2.7 V ~ 5.5 V
• Test Frequency: 800MHz
• Package / Case: 16-TSSOP Exposed Pad, 16-eTSSOP, 16-HTSSOP
• Frequency Range: 140MHz To 1GHz
• Rf Type: Quadrature
• Supply Voltage Range: 2.7V To 5.5V
• Rf Ic Case Style: TSSOP
• No. Of Pins: 16
• Operating Temperature Range: -40°C To +85°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
Table 3. Pin Function Descriptions
Pin No.
1, 2
3, 9, 13, 14
4
5, 6
7
8
10
11
12
15, 16
Mnemonic
IBBP, IBBN
COM3
COM1
LOIN, LOIP
VPS1
ENBL
COM2
VOUT
VPS2
QBBN, QBBP
Description
I Channel Baseband Differential Input Pins. These high impedance inputs should be
dc-biased to approximately 0.7 V. Nominal characterized ac swing is 0.6 V p-p on each
pin (0.4 V to 1 V). This gives a differential drive of 1.2 V p-p. Inputs are not self-biasing, so
external biasing circuitry must be used in ac-coupled applications.
Ground Pin for Input V-to-I Converters and Mixer Core.
Ground Pin for the LO Phase Splitter and LO Buffers.
Differential LO Drive Pins. Internal dc bias (approximately 1.8 V @ V
Pins must be ac-coupled. Single-ended or differential drive is permissible.
Power Supply Pin for the Bias Cell and LO Buffers. This pin should be decoupled using
local 1000 pF and 0.01 μF capacitors.
Enable Pin. A high level enables the device; a low level puts the device in sleep mode.
Ground Pin for the Output Stage of Output Amplifier.
50 Ω DC-Coupled RF Output. Pin should be ac-coupled.
Power Supply Pin for Baseband Input Voltage to Current Converters and Mixer Core.
This pin should be decoupled using local 1000 pF and 0.01 μF capacitors.
Q Channel Baseband Differential Input Pins. Inputs should be dc-biased to approxi-
mately 0.7 V. Nominal characterized ac swing is 0.6 V p-p on each pin (0.4 V to 1 V). This
gives a differential drive level of 1.2 V p-p. Inputs are not self-biasing, so external biasing
circuitry must be used in ac-coupled applications.
COM3
COM1
ENBL
VPS1
IBBN
LOIN
IBBP
LOIP
Figure 2. Pin Configuration
1
2
3
4
5
6
7
8
Rev. B | Page 5 of 20
(Not to Scale)
TOP VIEW
AD8345
16
15
14
13
12
11
10
9
QBBP
QBBN
COM3
COM3
VPS2
VOUT
COM2
COM3
S
= 5 V) is supplied.
Equivalent Circuit
Circuit A
Circuit B
Circuit C
Circuit D
Circuit A
AD8345