ETRX2USB-PA Telegesis Ltd, ETRX2USB-PA Datasheet - Page 6

• Manufacturer Part Number: ETRX2USB-PA
• Description: MODULE ZIGBEE PWR AMP USB STICK
• Manufacturer: Telegesis Ltd

Specifications of ETRX2USB-PA

• Function: Transceiver, ZigBee
• Modulation Or Protocol: 802.15.4 Zigbee
• Frequency: 2.4GHz
• Applications: ISM
• Interface: USB
• Sensitivity: -97dBm
• Power - Output: 18dBm
• Data Rate - Maximum: 250kbps
• Voltage - Supply: 4.75 V ~ 5.25 V
• Package / Case: Module
• Rohs Compliant: YES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 920-1003

ETRX2USB
7 Driver Installation and Operation
The drivers provided will generate a virtual COM port allowing easy access to the serial port of the
embedded ETRX2.
To read more about the ETRX2 wireless mesh networking module and its command line interface
please read the corresponding documentation which can be found at www.telegesis.com.
7.1 Windows 9x/XP/2k Driver Installation
The driver package downloadable from the Support
Software download page of
www.telegesis.com
should be unzipped into a local folder.
When executing the file
‘TgVCPInstaller.exe’ prior to plugging in the ETRX2USB stick an installer will guide you through
the steps required for the driver installation. If prompted that the driver has not passed the
Windows logo test simply press ‘Continue Anyway’.
Figure 1: Found New Hardware Wizard
®
After insertion of the stick, Windows
will prompt that new hardware has been found. If you have
run the ‘TgVCPInstaller.exe’ Windows will be able to install the driver by automatically as shown in
Figure 2. If you have not run ‘TgVCPInstaller.exe’ you will have to manually point to the directory
into which you have unzipped the driver.
©2009 Telegesis (UK) Ltd
- 6 -
ETRX2USB Product Manual (Rev 1.05)