GM-205610-000 DeLorme, GM-205610-000 Datasheet - Page 14

• Manufacturer Part Number: GM-205610-000
• Description: MODULE GPS RCVR GPS2056-10
• Manufacturer: DeLorme

Specifications of GM-205610-000

• Frequency: 1.575GHz
• Data Rate - Maximum: 57.6 kbps
• Modulation Or Protocol: GPS
• Applications: GPS Receiver
• Current - Receiving: 50mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 40 Pin
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Sensitivity: -
• Memory Size: -
• Other names: GM-205610-000TR

Available NMEA output messages
The message list is the sum of the IDs of each message included to the list. Example: to have only GSA and GSV output
messages the message list must to be 12.
Results: The selected configuration will be setup, no message will be sent as reply.
$PSTMTESTROM
This command evaluates a CRC of the ROM data and compares it with the one factory stored into ROM.
Command: $PSTMTESTROM <cr><lf>
Results:
eval_checksum>,<RomBoot_results>,<GPS_start_address>,<GPS_end_address>,<GPS_checksum>,<GPS_eval_
checksum>,<GPS_results>*<checksum><cr><lf>
$PSTMADCREAD
Reads each channel of the ADC.
Command: $PSTMADCREAD<cr><lf>
Results: $PSTMADCREAD,<ADC_ch0>,<ADC_ch1>,< ADC_ch2>,< ADC_ch3>*<checksum><cr><lf>
Message
GGA_NMEA_MSG
GGA5_NMEA_MSG
GSA_NMEA_MSG
GSV_NMEA_MSG
VTG_NMEA_MSG
FIL_NMEA_MSG
RMC_NMEA_MSG
RF_NMEA_MSG
TG_NMEA_MSG
TS_NMEA_MSG
PA_NMEA_MSG
SAT_NMEA_MSG
RES_NMEA_MSG
TIM_NMEA_MSG
Parameter
RomBoot_start_address
RomBoot_end_address
RomBoot_checksum
RomBoot_eval_checksum
RomBoot_results
GPS_start_address
GPS_end_address
GPS_checksum
GPS_eval_checksum
GPS_results
checksum
Parameter
ADC_ch0
ADC_ch1
ADC_ch2
ADC_ch3
Checksum
$PSTMTESTROM,<RomBoot_start_address>,<RomBoot_end_address>,<RomBoot_checksum>,<RomBoot_
Format
%03x
%03x
%03x
%03x
%02x
2048
4096
1024
8192
128
256
512
ID
16
32
64
1
2
4
8
Format
%08x
%08x
%04x
%04x
%d
%08x
%08x
%04x
%04x
%d
%02x
Description
ADC ch0 value ( 0x0 .. 0x800 )
ADC ch0 value ( 0x0 .. 0x800 )
ADC ch0 value ( 0x0 .. 0x800 )
ADC ch0 value ( 0x0 .. 0x800 )
Checksum of the message bytes without *<checksum><cr><lf> characters.
Description
The start address of the ROM Boot Code
The end address of the ROM Boot Code
The ROM Boot checksum factory stored into ROM
The evaluated ROM Boot checksum
1 for success - 0 for no success
The start address of the GPS Code
The end address of the GPS Code
The GPS checksum factory stored into ROM
The evaluated GPS checksum
1 for success - 0 for no success
Checksum of the message bytes without *<checksum><cr><lf> characters.
Page 14