ENW-C9A02A3E Panasonic - ECG, ENW-C9A02A3E Datasheet - Page 18

• Manufacturer Part Number: ENW-C9A02A3E
• Description: MODULE ZIGBEE 2.4GHZ EMBER W/ANT
• Manufacturer: Panasonic - ECG
• Series: PAN4570r

Specifications of ENW-C9A02A3E

• Frequency: 2.4GHz
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: General Purpose
• Power - Output: 3dBm
• Sensitivity: -97dBm
• Voltage - Supply: 2.1 V ~ 3.6 V
• Current - Receiving: 37.5mA
• Current - Transmitting: 41.5mA
• Data Interface: PCB, Surface Mount
• Memory Size: 128kB Flash, 5kB SRAM
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Rate - Maximum: -
• Other names: ENWC9A02A3E; P13685TR; PAN4570-ANT

CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER’S CODE
PAN4570
20 RECOMMENDED LAND PATTERN
HIGH FREQUENCY PRODUCTS DIVISION
Dimensions in mm.
The land pattern dimensions above can serve as a guidance, but this information is given without
any legal responsibility.
We recommend the use of the same pad dimensions for the solder paste screen as for the copper
pads, but slight different measures and shapes of the solder paste screen cutouts might be
optimum depending on your soldering process, for example on the chosen solder paste screen
thickness. The solder screen thickness depends on your soldering technology, we recommend
120µm to 150µm.
IMPORTANT:
The bottom side of PAN4570 is fully coated, nevertheless no copper, such as through hole vias,
planes or tracks on your board component layer should be located below PAN4570 in order to
avoid short cuts. In cases where a track or through hole via has to be located under the module it
has to be kept away from PAN4570 via holes. The PAN4570 multilayer pcb contains a inner rf
shielding ground plane, therefore no pcb copper plane directly below PAN4570 is needed.
If the integrated antenna version of PAN4570 is used, it has to be mounted on a board with a full
copper plane layer of at least 50mm x 50mm, else the radiation performance is degraded. Place
the antenna on the edge of your carrier board and avoid conductive or shielding parts other than
the carrier board in the near of the integrated antenna.
Empfohlenes Land Pattern
PANASONIC ELECTRONIC DEVICES
5.0
(EUROPE) GmbH
Module Business
MODEM FOR IEEE802.15.4 (ZIGBEE)
“ZigBee” Modem“ (IEEE802.15.4)
PRODUCT SPECIFICATION
26,5 mm (Module Lenght)
PANASONIC’S CODE
ENWCZA0xyzE
Produktspezifikation
1.00
Top View
48 x 1.00
4 x P1 = 0.70
12 x 1.00 x 1.00
36 x 1.00 x 1.30
Sign "1" on the Module
Pad #1
Pad #2
(Bottom Side)
APPROVED
genehmigt
Pin 1
40 x P2 = 0.40
2.00
No.
DS-4570-2400-102
PAGE
Seite
DATE
Datum
CHECKED
geprüft
0.20
1.30
16.03.2007
18 of 30
DESIGNED
erstellt
REV.
07