ENW-C9A02A3E Panasonic - ECG, ENW-C9A02A3E Datasheet - Page 27

• Manufacturer Part Number: ENW-C9A02A3E
• Description: MODULE ZIGBEE 2.4GHZ EMBER W/ANT
• Manufacturer: Panasonic - ECG
• Series: PAN4570r

Specifications of ENW-C9A02A3E

• Frequency: 2.4GHz
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: General Purpose
• Power - Output: 3dBm
• Sensitivity: -97dBm
• Voltage - Supply: 2.1 V ~ 3.6 V
• Current - Receiving: 37.5mA
• Current - Transmitting: 41.5mA
• Data Interface: PCB, Surface Mount
• Memory Size: 128kB Flash, 5kB SRAM
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Rate - Maximum: -
• Other names: ENWC9A02A3E; P13685TR; PAN4570-ANT

CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER’S CODE
PAN4570
28 REGULATORY INFORMATION
HIGH FREQUENCY PRODUCTS DIVISION
28.1 FCC NOTICE
28.2 CAUTION
28.3 LABELING REQUIREMENTS
PANASONIC ELECTRONIC DEVICES
•
•
•
•
The device PAN4570, including the ceramic antenna (ENWC9A02A3E) complies with Part
15 of the FCC Rules. The device meets the requirements for modular transmitter approval as
detailed in FCC public Notice DA00-1407.transmitter
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
The FCC requires the user to be notified that any changes or modifications made to this
device that are not expressly approved by Panasonic Electronic Devices Europe GmbH may
void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements
are met. This includes a clearly visible label on the outside of the OEM enclosure specifying
the appropriate Panasonic FCC identifier for this product as well as the FCC Notice above.
The FCC identifier are FCCID: T7VEM250A. This FCC identifier is only valid for the part
number ENWC9A02A3E (PAN4570 with mounted ceramic antenna). For details, please see
the chapter 25. Ordering Information.
The EUT is labelled with FCC ID: T7VEM250A. This Label must be visible for the user in the
end product. If the module is inside of an end product, the label will not be visible. In this
case the end product will be labelled exterior with "Contains FCC ID: T7VEM250A"
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
Consult the dealer or an experienced radio/TV technician for help
receiver is connected.
(EUROPE) GmbH
Module Business
MODEM FOR IEEE802.15.4 (ZIGBEE)
“ZigBee” Modem“ (IEEE802.15.4)
PRODUCT SPECIFICATION
PANASONIC’S CODE
ENWCZA0xyzE
Produktspezifikation
APPROVED
genehmigt
No.
DS-4570-2400-102
PAGE
Seite
DATE
Datum
CHECKED
geprüft
16.03.2007
27 of 30
DESIGNED
erstellt
REV.
07