ENW-C9A02A3E Panasonic - ECG, ENW-C9A02A3E Datasheet - Page 28

• Manufacturer Part Number: ENW-C9A02A3E
• Description: MODULE ZIGBEE 2.4GHZ EMBER W/ANT
• Manufacturer: Panasonic - ECG
• Series: PAN4570r

Specifications of ENW-C9A02A3E

• Frequency: 2.4GHz
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: General Purpose
• Power - Output: 3dBm
• Sensitivity: -97dBm
• Voltage - Supply: 2.1 V ~ 3.6 V
• Current - Receiving: 37.5mA
• Current - Transmitting: 41.5mA
• Data Interface: PCB, Surface Mount
• Memory Size: 128kB Flash, 5kB SRAM
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Rate - Maximum: -
• Other names: ENWC9A02A3E; P13685TR; PAN4570-ANT

CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER’S CODE
PAN4570
HIGH FREQUENCY PRODUCTS DIVISION
28.4 ANTENNA WARNING
28.5 APPROVED ANTENNA LIST
28.6 RF EXPOSURE PAN4570
PANASONIC ELECTRONIC DEVICES
Note: We are able to qualify your antenna and will add to this list as that process is completed.
The related part number for this device is ENWC9A03N2E (PAN4570 with mounted
connector). For details, please see the chapter 25. Ordering Information. This device will be
tested with an UFL connector from company Hirose and with the antennas listed below.
When integrated in the OEMs product, these fixed antennas require installation preventing
end-users from replacing them with non-approved antennas. Any antenna not in the following
table must be tested to comply with FCC Section 15.203 for unique antenna connectors and
Section 15.247 for emissions. The FCC identifier for this device will be available, after a first
measurement with an approved antenna.
To comply with FCC RF Exposure requirements, the Original Equipment Manufacturer
(OEM) must ensure that the approved antenna in the previous table must be installed and/or
configured to operate with a separation distance of 2.5cm or more from all persons to satisfy
RF Exposure compliance.
The preceding statement must be included as a CAUTION statement in manuals for products
operating with the approved antennas in the previous table to alert users on FCC RF
Exposure compliance.
Any notification to the end user of installation or removal instructions about the integrated
radio module is not allowed.
The radiated output power of PAN4570 with mounted ceramic antenna
(FCC ID: T7VEM250A) is far below the FCC radio frequency exposure limits. Nevertheless,
the PAN4570 shall be used in such a manner that the potential for human contact during
normal operation is minimized.
The EUT meets the requirements of FCC section 15.249, even if the EUT transmitted at the
maximum allowed field strength (50,000 uV/m),which the equivalent e.i.r.p would be
0.75 mW. End users may not be provided with the module installation instructions. OEM
integrators and end users must be provided with transmitter operating conditions for
satisfying RF exposure compliance.
Item
1
2
(EUROPE) GmbH
Module Business
Part Number
MODEM FOR IEEE802.15.4 (ZIGBEE)
“ZigBee” Modem“ (IEEE802.15.4)
Manufacturer
PRODUCT SPECIFICATION
PANASONIC’S CODE
ENWCZA0xyzE
Produktspezifikation
Frequency Band
APPROVED
genehmigt
Type
No.
DS-4570-2400-102
PAGE
Seite
DATE
Datum
CHECKED
geprüft
Gain (dBi)
16.03.2007
28 of 30
DESIGNED
erstellt
REV.
07