A16-1NRN Omron, A16-1NRN Datasheet - Page 47

• Manufacturer Part Number: A16-1NRN
• Description: NEON LAMP 110V RED FOR A16
• Manufacturer: Omron
• Type: Neon Lamp, 110 VoltsACr
• Series: A16r

Specifications of A16-1NRN

• Accessory Type: Neon Lamp Replacement
• Supply Voltage: 110V
• Base Type: Bi-Pin
• Colour: Red
• Current Rating: 1.5mA
• Svhc: No SVHC (15-Dec-2010)
• Illumination Colour: Red
• Operating Lifetime: 10000h
• Voltage Rating Vac: 110V
• Average Bulb Life: 1000
• Color: Red
• Illumination: Illuminated
• Height: 13 mm
• Illumination Color: Red
• Mounting Style: Snap In
• Termination Style: Tabs
• Lamp Base Type: Bi-Pin
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: A16 Series
• For Use With: Z1397 - SWTCH KNOB RND 3POS DPDT ILL REDZ1394 - SWTCH KNOB RND 2POS SPDT ILL REDZ1391 - SWTCH KNOB RND 2POS SPDT ILL REDZ1385 - SWITCH KNB RECT 3POS DPDT ILLZ1382 - SWITCH KNB RECT 2POS SPDT ILLZ1379 - SWITCH KNB RECT 2POS SPDT ILLZ1373 - SWITCH KNOB SQ 3-POS DPDT ILLZ1370 - SWITCH KNOB SQ 2-POS SPDT ILLZ1367 - SWITCH KNOB SQ 2-POS SPDT ILLZ1309 - SWITCH PB RND MOM DPDT ILLUM REDZ1305 - SWITCH PB RECT MOM DPDT ILLUMZ1301 - SWITCH PB SQ MOM DPDT ILLUM RED
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: A161NRN; Z1342

A3C
Mounting the Insulation Cover
After securing the Switch to the panel using the mounting nut, pass
the lead wires through the holes in the Insulation Cover and then
perform wiring. Hold the Insulation Cover so that the cylindrical hole
is facing the Switch, and insert the lead wires from the end with the
barriers.
After wiring is completed, mount the Insulation Cover by pushing it
into the Switch.
Mounting the Dust Cover
Mounting the Switch Guard
1. The Dust Cover separates into 2 parts: the cap and the
2. Insert the Switch into the mounting frame. (Align the lock
3. Insert the Switch in the state described in step 2 into the
4. Mount the mounting nut from the back of the panel and tighten
5. Insert the cap into the mounting frame. Ensure that the entire
1. Insert the Switch into the Switch Guard.
2. Insert the Switch into the panel in the state described in step
3. Mount the mounting nut from the back of the panel and tighten
mounting frame.
projection with the recess on the mounting frame.)
panel. (Align the lock protrusion on the mounting frame with
the hole in the panel.)
it.
perimeter of the cap is properly inserted into the mounting
frame by pressing down on the cap from different directions.
1.
it.
Cap (transparent)
Insulation Cover attached to Switch
Switch Lock protrusions
Guard (transparent)
Holder (black)
Mounting frame
Switch terminal
Mounting nut
Panel
Panel
Mounting nut
A3C
45