62-2324-2001-8 3M, 62-2324-2001-8 Datasheet - Page 8

• Manufacturer Part Number: 62-2324-2001-8
• Description: TAPE SCOTCH-WELD 4IN X 36YD
• Manufacturer: 3M
• Series: Scotch-Weld™r

Specifications of 62-2324-2001-8

• Tape Type: Film
• Adhesive: Epoxy Thermosetting
• Backing, Carrier: Crepe Paper
• Thickness: 0.0179" (17.9 mils, 0.455mm)
• Thickness - Adhesive: 0.0100" (10.0 mils, 0.254mm)
• Thickness - Backing, Carrier, Liner: 0.0079" (7.9 mils, 0.201mm)
• Width: 4.00" (101.60mm) 1/3'
• Length: 108' (32.9m) 36 yds
• Color: White, Off
• Usage: Bonding
• Temperature Range: 250°F (121°C) - 60 minutes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q5481988

3
Bonding Film
AF111 for Electronics Applications
Storage Requirements
Cleanup
3
Industrial Business
Electronics Markets Materials Division
3M Center, Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144-1000
www.3M.com/electronicmaterials
Precautionary
Information
For Additional
Information
Product Use
Warranty and
Limited Remedy
Limitation of Liability
40°F (4°C) / 6 months from date of shipment from 3M.
0°F (-18°C) / 12 months from date of shipment from 3M.
Uncured 3M™ Bonding Film AF111 can be removed using acetone, MEK or 3M™
Citrus Base Cleaner.*
*Note: When using solvents, extinguish all ignition sources and follow the
Refer to Product Label and Material Safety Data Sheet for Health and Safety Information before using this
product. For additional health and safety information, call 1-800-364-3577 or [phone].
To request additional product information or to arrange for sales assistance, call toll free 1-800-251-8634.
Address correspondence to:
Avenue, St. Paul, MN 55144-1000. Our fax number is 651-733-9175. In Canada, phone: [phone].
In Puerto Rico, phone: [phone]. In Mexico, phone: [phone].
All statements, technical information and recommendations contained in this document are based upon
tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect
the use and performance of a 3M product in a particular application, including the conditions under
which the product is used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the
user’s method of application.
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.
This Electronics Markets Materials Division product was manufactured under a 3M quality system registered to ISO 9001 standards.
The 3M product will be free from defects in material and manufacture for a period of one (1) year from the
date of manufacture. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING,
CUSTOM, OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a
particular purpose and suitable for user’s method of application. If the 3M product is defective within the
warranty period stated above, YOUR EXCLUSIVE REMEDY AND 3M’S SOLE OBLIGATION SHALL BE,
AT 3M’S OPTION, TO REPLACE OR REPAIR THE 3M PRODUCT OR REFUND THE PURCHASE
PRICE OF THE 3M PRODUCT.
manufacturer’s precautions and directions for use.
3
M Electronics Markets Materials Division, Building 21-1W-10, 900 Bush
- 8 -
Recycled Paper
40% pre-consumer
10% post-consumer
ISO 9001
Ultem is a registered trademark of
General Electric.
Printed in U.S.A.
©3M 2004
78-6900-9996-1
(3/04)