PIC16F1824-I/ML Microchip Technology, PIC16F1824-I/ML Datasheet - Page 125

• Manufacturer Part Number: PIC16F1824-I/ML
• Description: IC PIC MCU 8BIT 14KB FLSH 16QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F1824-I/ML

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 11
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 16-VQFN Exposed Pad
• Controller Family/series: PIC16F
• No. Of I/o's: 12
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 256Byte
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

12.2.3
Each PORTA pin is multiplexed with other functions. The
pins, their combined functions and their output priorities
are briefly described here. For additional information,
refer to the appropriate section in this data sheet.
When multiple outputs are enabled, the actual pin
control goes to the peripheral with the lowest number in
the following lists.
Analog input functions, such as ADC, comparator and
CapSense inputs, are not shown in the priority lists.
These inputs are active when the I/O pin is set for
Analog mode using the ANSELx registers. Digital
output functions may control the pin when it is in Analog
mode with the priority shown below.
RA0
1.
2.
3.
RA1
1.
2.
3.
RA2
1.
2.
3.
RA3
No output priorities. Input only pin.
RA4
1.
2.
3.
4.
5.
RA5
1.
 2010 Microchip Technology Inc.
ICSPDAT
ICDDAT
DACOUT (DAC)
ICSPCLK
ICDCLK
RX/DT (EUSART)
SRQ
C1OUT (Comparator)
CCP3
CLKOUT
T1OSO
CLKR
SDO
P2B
CCP2/P2A
PORTA FUNCTIONS AND OUTPUT
PRIORITIES
Preliminary
PIC16(L)F1824/1828
DS41419B-page 125