SI3015-FS Silicon Laboratories Inc, SI3015-FS Datasheet - Page 91

• Manufacturer Part Number: SI3015-FS
• Description: SI2400 ISOMODEM LINE-SIDE
• Manufacturer: Silicon Laboratories Inc

Specifications of SI3015-FS

• Data Format: V.90
• Interface: Serial
• Voltage - Supply: 3.3 V ~ 5 V
• Mounting Type: Surface Mount
• Package / Case: 16-SOIC (0.154", 3.90mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Baud Rates: -

Rev 1.0 to Rev 1.1 Change List
Table 6, “Voice Codec AC Characteristics,” changed
THD and Dynamic Range specs to typicals.
Table 9, “Global Component Values—Si2400
Chipset,” note 10 changed to “If the parallel phone
detection feature is not used, R25 and R26 may be
removed.”
Table 14, “Country-Specific Register Settings,”
updated to include new countries and revised
settings.
Table 25, “Low-Level DSP Parameters,”
DTML default value changed to 4868;
CONL default value changed to 2620, function
changed to “Level = 20Log
43 dBm”;
COFL default value changed to 3300, function
changed to “Level = 20Log
45.5 dBm”;
AONL function changed to “Level = 10Log
107) – 43 dBm”;
AOFL function changed to “Level = 10Log
58) – 45.5 dBm”
Register S14 (MF4)., “Modem Functions 4,” on page
54: TEO changed to 0 = Disable TIES escape
operation (default)”
1 = Enable TIES.
Register SF7 (DAA7)., “DAA Low Level Functions
7,” on page 76: LMO function changed to “See LMO
in Register F0 on page 71”.
Figure 10, “Signal Routing,” TX and RX changed to
TXD and RXD, respectively.
"Automatic Tone/Pulse Dialing" on page 30: clarified
chip revision ID numbering system.
Page 46: added register S83 “DTMF caller ID
initialization.”
"Appendix A—DAA Operation" on page 78: the
“EN55022 and CISPR-22 Compliance” wording in
the first paragraph was modified.
10
10
(2620/CONL) –
(3300/COFL) –
10
10
(AOFL/
(AONL/
Rev. 1.1
Si2400
91